Weird stutters in DirectVR Mode

Homepage › Forums › Technical Support › Weird stutters in DirectVR Mode

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • May 1, 2017 at 9:50pm #128134
    stas336
    Participant

    Recently i bought vorpx license and tried to play in HL2 and Mirrors Edge on my DK2 in DirectVR Mode. After some seconds textures start to jump even if you standing. I dont know how to fix this issue. My ingame fps is constantly around 74-75. Also without enabling DirectVR mode everything runs fine.
    My Hardware:
    OS : Windows 10 Pro Build 15063 x64
    Processor : Intel Core i5-3470 3.2 Ghz
    Videocard : Nvidia GeForce GTX 1070
    RAM : 8GB DDR3 1600 Mhz

    May 2, 2017 at 9:06am #128138
    bob24
    Participant

    did you go in bioshock ini file to change the resolution to be in what is recommended for vorpx.. that helped the stuttering on my computer a lot.

    May 2, 2017 at 9:09am #128139
    bob24
    Participant

    C:\Users\yourusername\Documents\My Games\BioShock Infinite\XGame\Config
    XUserOptions file scroll down
    this is minimum requirement for vorpx for 8:9 ratio

    ResolutionX=960
    ResolutionY=1080

    I hope it works and it should.. but 8gb ram for vr is only the minimum requirement for a lot of vr apps so haven’t tried it

    May 2, 2017 at 1:42pm #128140
    stas336
    Participant

    I thought that 1280×1024 is the best resolution for DK2 kit, not 1080×960, so i applied it in HL2 and Mirrors Edge. 8GB is optimal choice, because only 5GB used in VR gaming. Do you have DK2 or CV1?

    May 3, 2017 at 1:27am #128149
    bob24
    Participant

    make sure your resolution is inversed in the file I showed you it should play better.
    I use a cv 1 r9 fury and 16gb ddr4 and a 6700k
    ResolutionX=960
    ResolutionY=1080
    or
    ResolutionX=1024
    ResolutionY=1280

    May 3, 2017 at 2:33am #128150
    stas336
    Participant

    Why it should be inverted? Vorpx showing me that optimal resolution is 1280×1024, not 1024×1280.

    May 3, 2017 at 2:35am #128151
    stas336
    Participant

    I set my resolution and other parameters ingame menu (HL2 and Mirrors Edge) and it works fine, except stutters.

    May 3, 2017 at 2:40am #128152
    bob24
    Participant

    until you actually do it you wont see a difference with your system.
    if you really want to know why after you can read this it is too technical for me to explain even why but it works.

    Performance/Quality Tweaking with Custom Resolutions

    May 4, 2017 at 2:16pm #128176
    stas336
    Participant

    I tried this method in HL2 and Mirror’s Edge, but seems that they don’t support 8:9 aspect ratio. So stutters are here with me again.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.

Spread the word. Share this post!