Dead Space remake, anybody tried it ?

Homepage Forums General vorpX Discussion Dead Space remake, anybody tried it ?

Viewing 15 posts - 1 through 15 (of 21 total)
  • Author
    Posts
  • #214938
    Sephael
    Participant

    I’m at the point where i want to play some titles only if they works with vorpX or other VR solution.
    The new Dead Space remake being one of them.

    #214939
    Ralph
    Participant

    You can try to start with profiles using the Frostbite Engine.

    https://en.wikipedia.org/wiki/Frostbite_(game_engine)#Games_using_Frostbite

    #214941
    luka2099
    Participant

    you must use cyberpunk profile. for all game that work with dx12

    #214961
    bjr84
    Participant

    Hey folks. The game wont hook even with alt hooking method. Any suggestions?
    Ben

    #214963
    Sephael
    Participant

    Are you tryng to hook the correct exe ?

    #214965
    bjr84
    Participant

    This is a great question! Thank you!

    I found that I cannot set the (2023) ‘Dead Space.exe’, as the local (Vorpx) profile for original (2008) Dead Space is the same (i.e., ‘Dead Space.exe’). How can this be bypassed? Im using the Cyber Punk 2077 profile as a base and trying to set the path but wont let me given the existing Dead Space profile exe.

    I tried renaming the (2023) ‘Dead Space.exe’, and no hook plus Vorpx says its trying to hook to ‘Dead Space.exe’ regardless of the name change.

    Best,

    Ben

    #214968
    Sephael
    Participant

    Do you have the old Dead space installed as well ?
    If so, you could try remaming the old one (both file and exe).

    #214971
    bjr84
    Participant

    Thank you for the support. Unfortunately that didnt work either. The issue (possibly a noob one…) is that the native Dead Space profile cannot be overwritten/changed. You cannot save another profile in Vorpx pointing to the same named exe. Therefore, Vorpx will try to use the native profile (Dead Space 2008) for the new (2023).

    Its not hooking.

    Ralf! Can we get some support for this title?! THANKS IN ADVANCE!!!

    Best,

    Ben

    #214972
    bjr84
    Participant

    Also, and PLEASE!! not to detract from this discussion, as the Vorpx solution is ultimately the best and we need this, I have this running OK with ReShade*.

    *Install with ReShade.exe installer from product website (free); run Virtual Desktop; use ‘Half SBS’ (under ‘3D Options’); then run the game (!!be sure to turn off ‘Enable the steam overlay while in-game, and ‘Use desktop game theatre while SteamVR is active’ by right clicking on game in steam left panel prior to running). It looks great – while there is ‘no profile’ it looks pretty 3d to me in that screen. Problem I’m running into is CRAZY CHOPPINESS in some parts of the game – my system spikes for a long period of time and sometimes gives a video card driver version error message. I’m thinking its video card driver and dx12 compatibility issue. Had same issue with Cyber Punk 2077 and Vorpx when it first launched, but when a native profile came out, all was fixed by just running Vorpx, as Vorpx changed the settings appropriately. Hence, the note above saying Vorpx with native support will be best option!!!!

    I share this because I have the same concern as your initial comment – i only want to game in 3d as well. I have settled for a screen in VR headset for some titles. The smoothness is nice, but no 3d. This ReShade is a good option. IT WORKED BEAUTIFULLY (as of yesterday) WITH THE CALLISTO PROTOCOL!

    Just sharing this other option for when Vorpx doesnt work at the time.

    Ben

    #214973
    bjr84
    Participant

    Forgot to mention above – you have to select the SuperDepth 3D+VR option when installing ReShade, and when game is launched, press ‘Home’ button to open ReShade menu and turn on SuperDepth 3D+VR! Its super simple and my view is this is only to be used as a Vorpx alternative when a Vorpx profile cannot be found/created!

    Best,

    Ben

    #214978
    MarcDwonn
    Participant

    Yeah, i wish vorpX had such an open and easy way to configure profiles for new games – no more headaches with missing profiles, no more would Ralf have to read comments about profiles not working etc.

    But as they say: Different tools for different purposes. One is user friendly and very performant, the other is open and unrestrictedly tweakable. :)

    #214988
    bjr84
    Participant

    Ralf! Any chance of getting a profile / support for Dead Space Remake (2023)?

    (And thank you all for your input and support!).

    Best,

    Ben

    #214989
    matteo39
    Participant

    maybe mass effect andromeda profile, frostbite engine..

    #214990
    bjr84
    Participant

    Thank you, matteo39!

    From my understanding, it’s not the profile that’s the problem, but getting around the Dead Space 2008 native profile in vorpX, as it references ‘Dead Space.exe’ which is the same .exe as the remake (i.e., Dead Space ‘2023’). To my knowledge, there is no way in vorpX to by-pass/deactivate/turn off native vorpX profiles / an error message is given when trying to add an already used .exe from a native vorpX profile to a different profile (i.e., cant download, say, Mass Effect Andromeda, or Cyber Punk 2077 etc. profiles from the cloud and assign the same .exe (i.e., ‘Dead Space.exe’). Also tried renaming the remake .exe to something else and assign the cloud profile to that .exe and I’m confident these are the steps I tried and it did not work. That said, I will try again report back!

    Thanks again for this ongoing support, folks!

    Best,

    Ben

    #214992
    bjr84
    Participant

    Confirmed the above – it seems to be conflicting with the existing native Dead Space.exe/profile (native vorpX profile).

    Best,

    Ben

Viewing 15 posts - 1 through 15 (of 21 total)
  • You must be logged in to reply to this topic.

Spread the word. Share this post!