Homepage › Forums › Game Hints and Settings › Forza Horizon 6 Black Screen
- This topic has 3 replies, 1 voice, and was last updated Jun 8, 2026 1:37am by
tonydaracer.
-
AuthorPosts
-
Jun 7, 2026 at 6:42am #223217
tonydaracerParticipantGetting a black screen trying to play FH6. Any ideas? I’ve tried closing anything that might cause an overlay…not sure if I’m doing it right. I get audio just fine and I can still see my VR controller but the screen is black. I tried using the FH6 profile in VorpX and got the same results.
Steps I take to game:
1. Turn on PC
2. Plug in Quest 2, Moza R3, and any other peripherals
3. Open Moza Pit House and check / adjust settings (then I “close” the app which gives me the option to minimize it to system tray)
4. Turn on Quest 2
5. Initiate PC Link on Quest 2 from settings (hardwired to PC)
6. Run VorpX from Meta Link menu within Quest 2
7. Check VorpX settings
8. Either use AMD Adrenaline or Steam to launch FH6 (If I use Steam, I’ll close the app just before the game opens and I make sure AMD is closed as well).Specs:
VR Headset: Meta Quest 2 hardwired via official Meta link cable to USB-C port on the motherboard (on latest update as of 06June2026…need to turn on the headset to get exact number)
Meta Horizon Firmware: Meta Horizon Link Version 85.0.0.306.552 (85.0.0.306.552)
CPU: AMD Ryzen 7 7700X
GPU: AMD Radeon RX 6800 XT / AMD Adrenaline Software 26.6.1
OS: Win10 Pro 22H2 OS Version 19045.7291Jun 7, 2026 at 10:43pm #223220
tonydaracerParticipantForgot to mention I’m only running 1 monitor.
This issue only occurs on FH6.
I frequently play FH4 with VorpX just fine.
Jun 8, 2026 at 12:22am #223223
tonydaracerParticipantAlso forgot to mention VorpX version: 25.1.5
Jun 8, 2026 at 1:37am #223225
tonydaracerParticipantOkay so it worked today….
Steps:
1. Boot PC
2. Connect peripherals
3. Open Moza Pit House and adjust settings
4. Open AMD Adrenaline
5. Boot Quest 2
6. Initiate PC Link (hardwired) from Quest 2 settings
7. In Quest 2 Meta Link, select VorpX
8. The Meta Link app glitches, I hear the Windows 10 peripheral tone, then I get kicked back to the Quest 2 home screen
9. Wait for Quest 2 to detect PC connection, then click Enable
10. Back into the Meta Link App on my Quest 2, I clicked VorpX
11. Get taken to my desktop, adjust screen settings
12. Run FH6It works but the FPS is trash. I made a new thread for the FPS issue. This thread can be considered closed unless anyone wants to continue pursuing it.
This is also how I run FH4 but I start FH4 through the Microsoft Store app instead. And my FH4 works flawlessly in VorpX.
-
AuthorPosts
- You must be logged in to reply to this topic.
