Re-install on new drive fails

Homepage Forums Technical Support Re-install on new drive fails

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #204118
    doogie
    Participant

    I recently traded out an old drive for a larger new one. My old drive was designated the d: drive and my new drive is designated f:, and the old drive is no longer installed. I requested an updated install link, extracted the vorpX_WebSetup.exe in the location I want the new install to go on the f: drive. Half way through the install I get the following popup dialog error message (no error code, just this message):

    “The drive or UNC share you selected does not exist or is not accessible. Please select another.”

    I am not given an option to select a drive during installation.

    Any help would be greatly appreciated.

    #204151
    Ralf
    Keymaster

    Sounds as if the installer for some reason can’t access the folder you selected as install location. Please try to install vorpX in the default folder if installing it to a different drive fails.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.

Spread the word. Share this post!