- This topic has 3 replies, 2 voices, and was last updated May 5, 2015 8:21pm by
.
-
Posts
-
We have various HMDs. Currently have multiple versions of Sensics to include dSight with latest firmware. Also looking to use VR Union.
The Sensics dSight (with latest firmware) in landscape 1920×1080 mode displays a duplicated image with a single HMDI input when running with Arma2 and VORPX Sensics dSight mode enabled (version 0.8.1) The top half of the screen is correct and bottom half is the same image, but inverted.
Is there any ability to configure VORPX to work with these different HMD configurations to include binocular overlap adjustment?
Please contact support |at| vorpx com to get the last (and only) version which we were able to test with the dSight.
We only had a prototype for a short time to add support last year. Please be aware that it’s not even guarenteed that the current dSight version does still work with that particular vorpX version. With no way of testing that’s all I can offer.
We can loan you the latest version of the dSight. The other option is to make the software configurable such that we could adjust screen configuration, rotations/offsets, degree of binocular overlap, and interpupillary distance. I believe you only detect the dSight based on the presence of a YEI sensor.
- You must be logged in to reply to this topic.