Tries to update then closes

Homepage Forums Technical Support Tries to update then closes

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
  • #122826

    Whenever i try to start VorpX it automaticly starts an update of 44MB.
    When the update is complete it starts installing it. Then when it is done VorpX closes down.

    When i try to run it again it just does the same procedure all over again..

    I tried to restart and do it again.. Still, it just repeats the process.

    Any tips?


    I had the same problem. It seems to be related to the fact that Vorpx wants to close programs that might interfere with the installation process but can’t successfully do it, thus rolling back the update.

    Strangely enough, it seemed that Google Chrome was the culprit. I manually closed it through the task bar, and that seemed to do it.

    Alternatively, just using the installer and installing Vorpx again seems to work too.


    having the same issue. Don’t have Chrome open so no idea what would be causing it not to load.

    Requested a new download link, but that is taking forever as well.


    Make sure to use the same mail address to request the download that you used when you activated vorpX. Otherwise the request will not be processed.

    If the e-mail address you enter into the form is known, it takes 10 minutes max.


    Took me like 20 minutes to redownload the installer 44MB… With 100Mbps internet… Ralf needs better ISP. :P

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.

Spread the word. Share this post!