funkyhunk

[funkyhunk]

Thanks for the tip ralf, but no such luck. Still don’t work. I’ll try disabling the startup vids next.

[funkyhunk]

Fallout 3 worked almost right out of the box, but not new vegas. Annoying.

[funkyhunk]

I don’t understand the fault, if fo3 works, why shouldn’t fonv work? the engines are really similar.

[funkyhunk]

What is really annoying, is that it started up and worked ONE time.
In the midst of all the trying. Then the x360 controller started wibrating uncontrollably, and I had to exit the game to unplug the controller.
When I tried starting the game again it didn’t work.

NO changes to the display settings. That pi$$ed me off.

[funkyhunk]

None of the settings worked. I’m really at a loss here.

[funkyhunk]

Thank you for replying Ralf :)

I’ve checked, and doublechecked, the game config menu is set to 1920X1080,
And the falloutprefs.ini file under
[Display]

Is set to:
iSize W=1920
iSize H=1080

It didn’t help when I ran the game windowed.
When I set the rift config to direct mode, I get a small window in the upper left corner where the game starts up, reacting to rift movement, but nothing is shown on the rift.

I’m running Win7 64, on a i5 4690k @4.5ghz, and a 3gb GTX780oc card.
Are there other things I need to make sure is updated? the Vorpx drivers are the most recent, so are the display drivers. The dk2 has the newest firmware.

[funkyhunk]

I’d like to add that I have no mods, newly installed vanilla game with all expansions.
I also tried setting the refresh of the dk2 to 60hz, didn’t help.

[Author]

Posts