Search Results for 'Fe'

[PUZZELE]

Can anyone help?

I previously played the game Sine Mora using VorpX. It was the BEST game I’ve ever seen in 3D. I purchased the game from Steam.

However.. months later after who knows what updated driver was installed, it seems it does NOT work any more. I click on the game, it starts to load, I even see the initial game’s intro screen (just before the title screen), but then it immediately closes. No error. No nothing. It just closes. (If I disable VorpX, the game loads and runs fine).

Anyone have any idea how to fix this? I did NOT change any settings on my end since the last time it worked… so the only thing that could have changed is a newer driver was installed somewhere… but that could have been from steam, my pc, video card, who knows what.

Any ideas?

[Ralf]

2025/08/19

A new update is available that fixes a severe issue caused by nVidia drivers 580.88+.

If you experienced a black screen or crashes after updating your nVidia driver recently, please redownload the mod and reinstall it. That should fix the issue. As a side effect of the according changes the updated version may/should also run a bit smoother under high GPU load.

Download link as always in the first post of this thread.

[Ralf]

The latest mod download is for 2.3, but the latest nVidia driver breaks vorpX in some games, incl. Cyberpunk 2077. For the time being reverting to an nVidia driver 577.0 from a few weeks back should help:

https://www.nvidia.com/en-us/geforce/drivers/results/251131/

[_John Smith_]

Unfortunately I had not disabled automatic updates so Steam forced the new 2.3 update for Cyberpunk on me. I did download the new Vorpx Cyberpunk mod from the homepage but unfortunately it appears to be broken. Couldn’t get it to start in OpenXR or SteamVR. I’m using Virtual Desktop with Meta Quest 3. Everything worked fine with OpenXR and Cyberpunk and the Vorpx Mod before version 2.3. Can’t remember whether I had anything configured differently when I started Cyberpunk before the 2.3 update. Is there a known issue with the current Vorpx mod?

[Ralf]

Just in case someone stumbles over this thread.

The issue appears to occur with certain DX12 games. Should it persist longer than the next few nVidia driver versions, I will try to find a workaround. Until then let’s hope they clean up their messs.

The last non-broken driver appears to be 577.0
https://www.nvidia.com/en-us/geforce/drivers/results/251131/

PLEASE NO “NOT WORKING FOR ME TOO” POSTS BELOW THIS ONE, SO THAT OTHERS CAN FIND THIS ANSWER EASILY. THANKS! THANKS! THANKS!

The issue is the latest nVidia driver and the current solution is using the last non-broken driver (577.0) instead.

[Ralf]

Just in case someone stumbles over this thread.

The issue appears to occur with certain DX12 games. Should it persist longer than the next few nVidia driver versions, I will try to find a workaround. Until then let’s hope they clean up their messs.

The last non-broken driver appears to be 577.0
https://www.nvidia.com/en-us/geforce/drivers/results/251131/

Please no “not working for me too” posts below this one, so that others can find this answer easily. The issue is the latest nVidia driver and the current solution is using the last non-broken driver (577.0) instead.

[Nisch]

I just wanted to chime in that I’m also having issues with this driver and my 5090. It only happens in some games. For me it is with Farming Simulator 22 and 25. One of the issues is that the problem is intermittent. One thing I noticed is that when you change the tracking to “Safe” inside the game, it always replicates the issue, otherwise it’s intermittent for me. Sometimes the game is black, otherwise, it starts to flicker with no movement or action in the headset while the tracking in game often continues to work. Rolling back to 577.0 to see if that helps.

[Ralf]

Just in case someone stumbles over this thread.

The issue appears to occur with certain DX12 games. Should it persist longer than the next few nVidia driver versions, I will try to find a workaround. Until then let’s hope they clean up their messs.

The last non-broken driver appears to be 577.0
https://www.nvidia.com/en-us/geforce/drivers/results/251131/

Please no “not working for me too” posts below this one, so that others can find this answer easily. The issue is the latest nVidia driver and the current solution is using the last non-broken driver (577.0) instead.

[subroutine]

@Cheekyfella

What games are you playing that have this issue?

[abeardedpirate]

Have a PSVR 2. Installed the free mod to see what this is about.
In settings selected SteamVR since PSVR is using SteamVR app.
Launch game. SteamVR never brings up the game. Can see game if going to desktop mode or theater mode.
While game is open no inputs work. No keyboard inputs, no gamepad inputs, no inputs from my PSVR2 controllers.

I have uninstalled the mod, the game, fresh reboot, installed the game, rebooted, installed the free mod, fresh rebooted again and everything in between. The game will never register inputs. My keyboard does work as I can press Windows Key and get the start menu up to do other things. I can also hit the PS home key to bring up steam interface so I know my buttons work but they are not registering with Cyberpunk itself.

I uninstalled the mod and selected default on every setting inside of cyberpunk 2077 before rebooting and reinstalling the mod just to make sure everything is good. Since there is 0 interface with the free mod the only way I can get the VR selector up (Steam / Meta / Other) is to just reinstall the mod again.

I’ve launched Cyberpunk 2077 letting it open Steam VR and I’ve launched Steam VR and then opened Cyberpunk with no luck.

I went on Steam settings and have enabled steam input override for Cyberpunk 2077. I’ve tried it disabled and enabled same issue both ways.

I’m on an i9900k with a 2080ti with the PSVR2 plugged directly into my 2080ti. I haven’t had issues with other actual VR games/programs but I can’t make this work. Nothing seems to do anything. Delete / left button + right button / and L3 or w/e gamepad is nothing brings up any settings like the mod installer says it does.

Any help would be appreciated cause I feel like I’ve exhausted all the troubleshooting steps I’ve seen on this forum at this point.

[Detective_Yoshi]

This channel is posting some Vorpx games these days like Castlevania, Darksiders, Psychonauts, and among them, Hail to the king, babe, come get some!!!

https://youtu.be/6xkxFEyWPYQ?si=DMdL82pSesYHYnV0

[matteo39]

i have no 3d effect

[Ralf]

Seeing the desktop in the headset after ALT+TAB while vorpX is hooked into a game is not possible. vorpX always sends the game/app to the headset that it is hooked into, no matter whether it runs in the foreground or not.

I’m not even sure whether handling that differently would be a good idea, as it would mean that every time a game loses input focus vorpX would change to the desktop viewer. Although beneficial for ALT+TAB, there probably are just as many occasions where such a behavior is unwanted.

What you can do while using vorpX’s virtual monitor however is taking off the headset to get the desktop on your actual monitor after a few seconds. Might crash one or the other game, but in most case that should work I think.

[Benedict81]

Hello.

I’ve been using Vorpx for awhile now and it is great to get to play some games in G3D that you could not otherwise. Some technical questions or features that I’ve got in my mind though…

On Virtual Desktop \ Virtual Monitor, is there a way to create any resolution that I want or could this be a feature to maybe add to it? Like now I can create 1:1 aspect ratio resolutions that are something like 2804×2800, so 4 pixels wider and the only other option is the 4:3 aspect ratio resolutions. Would be cool to be able to create any resolution with numbers for width and height. Also using the Virtual Desktop \ Virtual Monitor, is there anyway to alt+tab out of it if my monitor is shut down? Sometimes you need to use something like Cheat Engine to mod a wider FOV in to a game and you need to alt+tab out when the game starts to start the Cheat Engine. Now, I can do this if I am not using Virtual Desktop and my monitor is running, but if I keep my monitor on, I cannot use the Virtual Monitor resolutions with games, only when the monitor is shut down I have access to these Virtual Monitor resolutions within games.

Something that I’ve also noticed and maybe its just me, but I’d love to be able to crank the sharpening higher sometimes. It is very game dependent if the maximum setting is enough or too much. Sharpness is very important, at least to my eyes when playing in VR and the Vorpx sharpening tool leaves me wanting more sometimes. Any recommendations for a way to add more sharpening? Obviously Nvidias own Sharpening filter does not work and I can’t use OpenXR-toolkit anymore since some PimaxPlay updates ago.

Thanks!

[yaglourt]

@moderators: Could you please delete my three previous posts?

**How to center and shrink the minimap (and other HUD elements):**

1. Copy the update.rpf file from your game’s update folder to the mods\update folder. (You’ll need to create these directories if they don’t exist).
2. Use a tool like OpenIV or CodeWalker to open the update.rpf file that you just placed in your mods folder.
3. Navigate to common\data\ui\ and replace the frontend.xml file with the one provided at this link

You may need to adjust the minimap’s horizontal position if your in-game resolution is different from mine (1920×1440). To do this, edit the frontend.xml file and look for the lines that begin with:

* <data name="minimap"
* <data name="minimap_mask"
* <data name="minimap_blur"

Then, increase or decrease the three posX values by the same amount to shift the position.

I also recommend the “GTA 5 HUD Toggle” mod (bind F12 to down D-Pad to toggle the minimap)