Jumping Display in Arma3 VR mode

[Venson]

Hey,

I have read a lot of posts related how to setup Arma3 for VR. I have read through the basic trouble shooting but still i have some weird display when starting ARMA3 in VR mode.

You can see that here: https://www.youtube.com/watch?v=BVziMxCfyxQ&feature=youtu.be

(dont mind the times the recording went black, this happens because i did not move the headset)

[Ralf]

Is this happening with vorpX alone or are you using OpenTrack for head tracking?

If you are using OpenTrack, you have to disable vorpX’s head tracking, either in the vorpX config app or in the ingame menu.

Might also be worth a try to disconnect gamepads and joy-/flight sticks for testing.

[Venson]

I have tried to start Arma with and without opentrack (2.3.1-beta3).
I dont own any gamepads nor joysticks etc. Only mouse and keyboard.

I will try to disable VorpX head tracking, but i can not take use of the ingame menu because i cannot see it^^.

[Ralf]

You can also disable head tracking in the config app (‘General’ page).

If the issue also occurs with head tracking disabled, it’s an OpenTrack configuration issue.

[Venson]

it seems like it is now working when disabling the VorpX headtracking but unfortunately there is some kind of delay (50-70ms) with the headtracking so i might have to tweek the settings a bit.

Thank you.

I have refereed to this post for the Arma3 config: https://www.vorpx.com/forums/topic/arma-3-settings/
where you explicitly call to enable Head Tracking.

[Ralf]

I have refereed to this post for the Arma3 config: https://www.vorpx.com/forums/topic/arma-3-settings/
where you explicitly call to enable Head Tracking.

Only without OpenTrack, with OpenTrack there would probably some kind of conflict between OpenTrack and vorpX’s head tracking.

[Author]

Posts