deezdrama

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • deezdrama
    Participant

    moarveer… thanks for the reply

    Im pretty sure im in znormal mode and the low frames but will check.

    As for the 3d FOV causing issues… maybe this is why I am having problems with all different install options (overhauled 3.0, overhauled 3.0 with older graphics extender option, vanilla morrowind with mge ex)

    This would be good and bad,
    good- since I should be able to get it to run with overhaul 3.0

    Bad- that I spent a day reinstalling a million times if this was the only issue LOL

    But…. what FOV option are you speaking of exactly?

    The one that you set in the morrowind graphics extender options (fov 120 is what i set mine to because of guides ive read)
    or…. is it a setting from inside the vorpx menu itself?

    thanks again!

    deezdrama
    Participant

    Its in 1080 and setting IPD to 64 fixed the blurry problem though I dont know why this happened since I had vorpx and oculus config set to 67mm and bf4 in vorpx was fine. I tried in all the different modes… geometry, zadaptive,etc

    Fov is set in morrowind graphics extender to 120 as I read in several guides that this is the fov needed.

    tried with morrowind + 3.0 overhaul and all i got was either all red or all white textureless scenes.
    I tried turning “distant lands” option off because i heard it can cause this but no luck turning it off.

    I then tried changing the morrowind graphics extender from mge xe to the older version 186 but kept getting errors from the overhaul installer.

    I then did a fresh install with morrowind 3.0 but this time used the older v 186 graphics extender and distant lands shutoff…. still got the textureless mess.

    By the end of the night I had reinstalled it 4 times and couldnt get any combo of settings to run with the overhaul,
    I ended up doing a fresh install with just the mge xe graphics extender installed and finally got it to work….
    its pretty cool but is way too glitchy still, now instead of the whole world being white and textureless, things look fine but every couple of seconds whole walls and buildings will glitch out and disappear leaving blue textureless voids where they were.
    Also i noticed scale seemed weird like all npc’s looks huge and when looking at there feet it looked like looking down from a mile high canyon. I have fov set to 120 and played around with the vorpx settings but never got it to feel quite right.

    I could of lived with it but the buildings and walls glitching away every other second just made it unplayable so I gave up.

    I read that ralph used the morrowind overhaul 2.0 for vorpx but I cannot find anything but version 3.0.

    I dont know what the deal is. Ive tried 2 different versions of the main game files, made sure all drivers and dx are up to date. Tried all different co figurations of overhaul.

    I also noticed i was only getting fps in 30’s and 40’s….
    this shouldnt be the case as its just vanilla morrowind with the graphics extender installed….no other mods.
    battlefield 4 was running fine in vorpx off the bat so i dont know what the deal is but spent a whole day trying to play morrowind with no luck.

    in reply to: Morrowind Help #21196
    deezdrama
    Participant

    Finally after a whole day and 4 installs of morrowind …I got it working by skipping out on the overhaul and just installing MGE EX.

    In my rift config my IPD is 67, I also set vorpx to 67 and did not checkmark “use user profile” but in the game the images were out of focus…once changing my ipd ingame with vorpx settings to 64 everything is in focus.

    But…..
    I messed with all the settings trying to figure the problem out on the first tab that opens when you hit the del key to bring up vorpx menu.

    Anyone know what these default settings should be?

    deezdrama
    Participant

    Ive spent all day reinstalling this game and installing the overhaul following this german translated guide found here…

    http://mandelbroetchen.net/2014/10/05/morrowind-mit-der-oculus-rift-dk2/

    I followed the directions word for word and now when I run morrowind the menu is just a red screen with a black box, if I click around and get lucky to start the game I start in the boat and headtracking works but everything is red or shades of red and just like before the 2 images im seeing dont match up, they are separated and its nauseating like your drunk and crosseyed.

    Im getting really frustrated, this game is only reason I bought vorpx and spent a whole day trying to get it to work.
    Unfortunately it seems noone plays or cares about this game, how can I get help with this?

    in reply to: Morrowind Help #21177
    deezdrama
    Participant

    Ive spent all day reinstalling this game and installing the overhaul following this german translated guide found here…

    http://mandelbroetchen.net/2014/10/05/morrowind-mit-der-oculus-rift-dk2/

    I followed the directions word for word and now when I run morrowind the menu is just a red screen with a black box, if I click around and get lucky to start the game I start in the boat and headtracking works but everything is red or shades of red and just like before the 2 images im seeing dont match up, they are separated and its nauseating like your drunk and crosseyed.

    Im getting really frustrated, this game is only reason I bought vorpx and spent a whole day trying to get it to work.
    Unfortunately it seems noone plays or cares about this game, how can I get help with this?

Viewing 5 posts - 1 through 5 (of 5 total)

Spread the word. Share this post!