- This topic has 1,005 replies, 177 voices, and was last updated Sep 22, 2025 5:24pm by
.
-
Posts
-
I got it working. I uninstalled and reinstalled CyberpunkVR_Setup and it subsequently works from Meta Link.
2025/08/19
A new update is available that fixes a severe issue caused by nVidia drivers 580.88+.
If you experienced a black screen or crashes after updating your nVidia driver recently, please redownload the mod and reinstall it. That should fix the issue. As a side effect of the according changes the updated version may/should also run a bit smoother under high GPU load.
Download link as always in the first post of this thread.
2025/08/23
A new update is available that fixes crashes when changing the display mode and some graphics settings in the game options, which were introduced by the earlier fix for the nVidia 580.88+ issue. Also addresses an annoying non-critical crash when exiting the game that could occur since a while.
Download link as always in the first post of this thread.
Yo anyone know where i can find a version of this mod for cyberpunk 2.1? I dropped the game for a while but now that i found this mod i want to continue my playthrough in vr. Can’t update the game to the newest version cause i don’t wanna break the mods i was using on the playthrough. I’ve been able to get the game to launch by rolling back to the version of cyber engine tweaks for 2.1 and everything seems to work as intended except for full vr not working, instead it just shows in cinema view or as if i had edge peak on so afaik it’s either broken from the version mismatch or i just can’t for the life of me figure out how to toggle edgepeak off but i swear I’ve pressed every button lmao. I feel like it’s so close to working, the beginning tutorial area works completely fine and works just as you’d expect a vr environment to w me being able to look around and all, any help with either downloading an older version of the mod or with getting this one to work is greatly appreciated, thanks in advance!! (and ralph from what I’ve seen so far and in videos this mod seems amazing and imo will be the best option for cyberpunk vr if i can get it to work since it has motion control support, great work!)
I should add that i also tried on a new game without any mods, just this and cet but with the same game version, just to test if the mods were messing with it and it was still doing the exact same thing so i don’t think it’s a conflict issue, forgot to add that to my first post loll
I just wanted to drop some feedback on Cyberpunk in VR with Vorpx since I got working this week. It is awesome! I got the same feeling again like when I played Half-Life: Alyx for the first time with my Meta3; I was floored! Once you dial in the VR settings with Vorpx, it looks great and is smooth. I find myself just putting around and taking in the sights, as it really changes the perspective of the game; almost like it is brand new game you are playing for the first time. The immersion even gets to me a little bit. Like being high up in the game and looking around/down, I will get the heebie-jeebies for a bit lol. I wear my Astro A50 headphones with my meta3 and it is a great immersion bubble for the game. The sights and sounds really are great. And aiming with your head is growing on me as well, though I play with a xbox controller to get around. It works well imo once you practice the aiming mechanic with your head movements and the body movements with the controller.
Some parting thoughts. I fired up Alyx again to compare the graphics between both and Alyx is way better than CP2077 by a long shot imo. To note I do have an RTX 5090, so I am sure that is factor. However, to be fair of course, Alyx is a purpose-built VR game, and it is nowhere as open-ended like CP2077. But if CP2077 was as CLEAR and SMOOOTH as Alyx in VR at least, man CP2077 would be the game of the decade for VR play. Well, if anyone actually knows how to tweak CP2077 to have the same clarity and smoothness as Alyx on a meta3, I am all ears lol.@ garken
Your symptoms are typical for a CET version mismatch or otherwise not fully loaded mod. Double check that you really have the right CET for your game version and that it’s installed in the right place.
If you are 100% sure both conditions are met, the mod doesn’t work with 2.1 anymore. Unlikely, but not impossible. In that case you have to switch CP2077 2.3, which will work out of the box with the current mod version.
@ djbert
There is a ‘Resolution Quality’ option in the mod’s options menu (DEL key). With your 5090 you should be able to crank it up fairly high. Go has high as you consider OK performance wise with the image quality settings you prefer. No raytracing yields the best possible performance, no DLSS the best possible image sharpness. If you want raytracing you’ll probably need DLSS too though to keep the framerate high enough.
@ garken
Your symptoms are typical for a CET version mismatch or otherwise not fully loaded mod. Double check that you really have the right CET for your game version and that it’s installed in the right place.
If you are 100% sure both conditions are met, the mod doesn’t work with 2.1 anymore. Unlikely, but not impossible. In that case you have to switch CP2077 2.3, which will work out of the box with the current mod version.
@ djbert
There is a ‘Resolution Quality’ option in the mod’s options menu (DEL key). With your 5090 you should be able to crank it up fairly high. Go has high as you consider OK performance wise with the image quality settings you prefer. No raytracing yields the best possible performance, no DLSS the best possible image sharpness. If you want raytracing you’ll probably need DLSS too though to keep the framerate high enough.
Ralf,
thank you for the input and i have it set up the way you have described. i also have the resolution quality on Ultra as well. i found the smoothness is the best with 120 FPS(set on the meta3), but i cant hold that FPS in busy scenes, and it typically drops to a stable 60 FPS in that situation. still playable but you can notice the difference between the two FPS when it shifts obviously. if i use DLSS, the FPS jumps up some but the image ghosting is a little much to my liking. I found the ghosting amount is due to the faster performing DLSS options and DLAA looks the best, but my FPS drop to 3O-40 FPS if i enable it.
random thought for you. is it possible to use 2 GPUS to process the stereo images? the right and left image on their own GPU? my understanding is the GPU is rendering both images normally, which is going to be taxing no matter what you do. so why not distribute the load? i am spit-balling that would allow some non-VR games to look even better with vorpx or other VR implementations.
2025/09/12
A new update is available that adds support for Cyberpunk 2077 2.31 and updates the core components to match the latest vorpX version.
Download link as always in the first post of this thread.
If you have the latest vorpX 25.1.2 installed, vorpX is a bit better since it comes with additional stuff like the virtual monitor, which the mod does not have. Also when you use vorpX you get notified automatically when updates are available. In terms of ingame features both are quite similar though.
Thanks! I’ll just update my VorpX (don’t remember the version) and go from there. Any tips for Cyberpunk + KAT VR?
Nothing really, except that something like KAT VR is probably the perfect platform for playing with gesture controls, so don’t skip the gesture tutorial on launch. And graphics settings wise depending on your PC aim for a high resolution over raytracing.
What’s the best way to optimize my game for pc build? What settings should I tweak? Also, does the licensed vorpx inject the cyberpunk 2077 from the free version of the mod? I’m just trying to make sure I’m running the latest version from vorpx. I’m up to date. I updated CET and I can get in and run the vr. I’d like to fix the black bars that I see around my screen, do i need dial up my screen resolution in game? It’s also very choppy when I play so I know i have to tweak some things back in my settings. Does Vorpx allow dlss or no? Thank you for any assistance that you can provide me.
- You must be logged in to reply to this topic.