Homepage › Forums › Game Hints and Settings › User Profiles › Old User Profile Thread
- This topic has 227 replies, 15 voices, and was last updated Oct 20, 2018 2:31am by zahncisten.
-
AuthorPosts
-
Oct 7, 2018 at 8:12am #175702ilkj4832zParticipant
Mad max’s profile already has one in CLOUD.
But it was Z – Normal, but it was not 3D at all.
My profile is properly 3D.Oct 7, 2018 at 12:26pm #175704matteo39ParticipantMad max’s profile already has one in CLOUD.
But it was Z – Normal, but it was not 3D at all.
My profile is properly 3D.i buy mad max for your profile! :)
Oct 7, 2018 at 10:26pm #175709matteo39ParticipantMad max’s profile already has one in CLOUD.
But it was Z – Normal, but it was not 3D at all.
My profile is properly 3D.i’ve tried your profile and the other, and i have bad news…
the first profile has no 3D depth at all, while your profile has graphic artifacts, lines along the entire screen
Oct 8, 2018 at 12:17pm #175757RJK_ParticipantOct 8, 2018 at 2:37pm #175760ilkj4832zParticipantKingdoms of Amalur Reckoning – G3D(Open World RPG)
Jet Set Radio – Z-Normal(Attention:It May not Start)Profile Availiable from the cloud.Check it.
Oct 9, 2018 at 2:32am #175771zahncistenParticipantSword Coast Legends in G3d. Profile in Cloud. With the following note:
“Works great, shadows look terrible. I had to disable. During load, left side goes dark. Otherwise perfect.”If anyone has any suggestions, please send me a message.
Oct 9, 2018 at 3:01pm #175780zahncistenParticipantRepublique in G3d. This game is so cinematic and awesome to begin with I so wanted to make it in VorpX and it works awesome! The menu is a little funky and the cutscenes are a little disconcerting, but once you get passed that, the actual game play is awesome. the 3D looks perfect. It’s definitely worth trying out. I’ve asked for S3D options on the profile, because the shadows are a little off during the cutscenes. Thanks to focal offset, during gameplay, the shadows are right where they should be, though.¯\_(ツ)_/¯
Profile is Republique, with the following comment:
“Works great. Menu looks a little strange, and cutscenes aren’t perfect, but actual gameplay is spot-on 3d and looks amazing. Try it out!”Oct 10, 2018 at 9:14am #175791ilkj4832zParticipantDIRT4 – Z-Normal
Ridge Racer Unbounded – Z-Normal
Way of the Samurai 3 – Z-NormalProfile Aviliable from the cloud.Check it.
Oct 10, 2018 at 9:07pm #175799RJK_ParticipantOct 10, 2018 at 11:17pm #175800zahncistenParticipantFinal Fantasy XIV – A Realm Reborn in Z-Normal. It looks good.
“Z-Normal. No G3d but looks good. Make sure you exclude ffxivlauncher.exe, since VorpX will try to attach to it. The profile is set to the right file for the actual game.”
Oct 11, 2018 at 7:25am #175802ilkj4832zParticipantAce Combat Assault Horizon – G3D
Profile Availiable from the cloud.check it.
Oct 11, 2018 at 12:43pm #175803RJK_ParticipantDisneys Chicken Little (DGVoodoo2) – G3D
– Cute Jump n Run Game
– DGVoodoo2 required
– Force Resolution with DGVoodoo to desired value
– Dont use Full VR mode
– Profile availiable from the cloudOct 11, 2018 at 2:28pm #175806ilkj4832zParticipantDanganronpa Trigger Happy Havoc(OPEN GL) – G3D(Note:Select Open GL in Setting)
Cloudbuilt – G3DProfile Availiable from the cloud.Check it.
Oct 11, 2018 at 5:06pm #175807zahncistenParticipantLegend of Heroes – Trails of Cold Steel
“Z-Normal. In first settings, set FOV to 60 (This sets the Horizontal FOV to 90). Exclude Sen1Launcher.exe.”
Oct 11, 2018 at 5:49pm #175808ilkj4832zParticipantSpintires MudRunner – G3D
There is already a profile in CLOUD.
But it seemed not to be 3D.
My profile is G3D.Profile Availiable from the cloud.Check it.
-
AuthorPosts
- The topic ‘Old User Profile Thread’ is closed to new replies.