jamessto

Forum Replies Created

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • in reply to: Deepoon E2 #111048
    jamessto
    Participant

    Hi guys sorry I haven’t been back on. I’d given up on the Deepoon but can now confirm I’ve got it working now. It turns out my £1600 laptop isn’t good enough! It has a gtx965m gpu and can play the most intense games but the bad news is that the HDMI port is on the intergrated graphics chip so no Oculus compatability.

    I dragged out my old PC which has a gtx 750ti and was able to run it on there with no issues at all.

    So if you have a laptop don’t touch any VR product as they ar unlikely to operate but as far as the Deepoon is concerned it isn’t faulty and runs fine even on an old 750ti.

    It was fun to use but damn I got some motion sickness on the thing. I’m looking forward to using it for developing some VR animations (the reason I didn;t splash out on a rift or vive.

    Thanks for all your help and advice.

    James

    in reply to: Deepoon E2 #110817
    jamessto
    Participant

    Uninstall it in the device manager? I couldn’t find it in there.

    in reply to: Deepoon E2 #110815
    jamessto
    Participant

    Hi Markocova do you disable deepoon assistant before opening oculus rift the same as Dennis mentions above or does your method work with Deepoon Assistant operating as well?

    in reply to: Deepoon E2 #110813
    jamessto
    Participant

    The other thing is when the headset is in dk2 the screen is black and not showing anything.

    in reply to: Deepoon E2 #110812
    jamessto
    Participant

    So im hoping this isn’t annoying you guys all the questions but I’ve done the above and now I can hear the audio through the deepoon I still can’t get the video on the hmd when running the apps. I tried holding the button down and I got the purple light then held it down again and it blinked then turned off.

    I’m going t rollback my grpahics card drivers to see if that makes a difference unless I’m meant to change my screen settings do i need it set to duplicate screen or anything like that?

    Thanks,

    James

    in reply to: Deepoon E2 #110810
    jamessto
    Participant

    Hi guys thanks here’s the images:

    https://goo.gl/photos/hgudM1r5jKiaSnLi8

    https://goo.gl/photos/5XvhBnqzRJ2HJ2B47

    I keep getting the oculus pop up at the bottom saying the hdmi isn’t detected.

    in reply to: Deepoon E2 #110806
    jamessto
    Participant

    tried and it just ran it on my laptop monitor. Could this be issues with my laptop gpu drivers its a gtx 965m?

    in reply to: Deepoon E2 #110804
    jamessto
    Participant

    Hi thanks guys so the 13 second method got me further than before in that I now have this on oculus home: https://photos.google.com/search/_tra_/photo/AF1QipMLp1EBg6lzFgeHOAb-m1SCv8vfg11fIMVa2pes

    except when I go to run the games from the library I get this message:
    https://photos.google.com/search/_tra_/photo/AF1QipPnhSWzjavBEwFblkmWRwrZS6M0QbODksfMI4yg

    Thanks in advance

    in reply to: Deepoon E2 #110802
    jamessto
    Participant

    Hi mate, thanks,

    thats the same here but I’m usually pretty good with tech and installing stuff but this has had me stumped literally for days.

    I’m just doing a fresh install now to try out your suggestions. is VORPX essential to get it working or should it also play with the above method without VORPX?

    Cheers,

    James

    in reply to: Deepoon E2 #110799
    jamessto
    Participant

    also just to check you are both running it on win 10 with the latest occulus home update?

    Thanks,

    James

    in reply to: Deepoon E2 #110798
    jamessto
    Participant

    Hi Dennis_S and Markocova,

    Really appreciate the quick responses,I’m going to give your suggestions a go and see if it works. Once I have it working I’m going to put together a youtube video for others to follow and will mention your help.

    Cheers,

    James

    in reply to: Deepoon E2 #110786
    jamessto
    Participant

    So I’m having a lot of problems installing this I followed the instructions but the deepoon hmd light only goes blue when in deepoon mode and wont turn on in dk2 mode and therefore oculus home isn’t running.

    Anything I’ve missed from the installation process?

    Thanks,

    James

    in reply to: Deepoon E2 #110779
    jamessto
    Participant

    Hi Guys, name’s James and recieved my Deepoon E2 on saturday and still haven’t got it set up. Dennis_s post is what got me to sign up to the forum. I will try out Dennis’ walkthrough above and hopefully that will resolve it. Appreciate people putting helpful info out there.

    Thanks,

    James

Viewing 13 posts - 1 through 13 (of 13 total)

Spread the word. Share this post!