seelenmord1986

[seelenmord1986]

Im curious to know if it works for you. Keep me posted

[seelenmord1986]

I had the exact same issue. For 3 days it did not work. I contacted Ralf. He advised me to restore the profile for ME3 in the troubleshooting section of VorpX. I did that, still nothing. Then I decided to just click the “factory data reset” option in VorpX. I went back into the game (without restarting my computer) And still nothing. I gave up, shut down my computer, left for work. And when I got back home, I booted up my computer, launched ME 3 again, and all of a sudden it worked, Perfectly.
I think that restarting my computer finished what the “profile restore” or “factory reset” started. Just be sure to re-select the “show only in rift” and “run as administrator” options. And I think the factory reset thing deletes all the VorpX settings for the games so maybe try just the “profile restore” for Me3 first as I’m not sure which option actually fixed the issue. Hope this helps.

[seelenmord1986]

So first off let me start by saying, when I got the rift a week ago, I didn’t know ANYTHING about resolutions and monitors, or what most of the settings meant. I got some games working by google and “What does this button do? Oops” I still don’t know very much and have ALOT to learn. After being frustrated and buying this program or downloading and injecting that mod, and almost regretting buying the Rift because I didn’t know what I was doing, I finally found a setup that works for me.

I decided that maybe I could help some poor soul out there that’s in my same shoes, kind of get going with Skyrim. So I decided to post this “in no way official, but hopefully at a little helpful to someone guide” This worked for me, but may not work for you. I am literally just listing what I did, and my results. That being said Follow AT YOUR OWN RISK.

I guess it should be noted that I have NVidia (couldn’t tell you the model or if the settings are the same as your Nvidia) and the settings below are for that graphics card. I’m using Windows 8.1. I have 2 DVI ports on my computer and have the Rift plugged into my left port (if I’m facing the back of the computer) and my Computer monitor plugged into the right one. Also I am not using any visual mods for Skyrim (that I am aware of) Only Skyrim (with all the DLC), Oculus software, and VorpX.

First open Skyrim without Oculus attached, load a saved game.

This is important: Change Fov (Field of View) by doing the following:
-While in loaded game hit the ~ on keyboard. This will open a command screen (I guess that’s what it’s called)
– Type the following (without the quotes) “fov 120” and then hit enter
– Hit the ~ again to close the command thingy
– Save a new file

The screen will look stretchy without the rift on. You want this because things will be too close while in the Rift if this is left to the games default FOV. This can easily be change back for play without the Rift by following the steps above and changing the FOV back to 65 (the original FOV).

— I freaked when I first did this because VorpX did it for me. I didn’t know the term “FOV” and I didn’t understand why Skyrim looked stretched when I didn’t have the Rift on. I deleted and re-installed my Skyrim like 3 times, thinking that I broke something, before I researched and figured this out. Whatever, I learned something new.

Quit Skyrim

Now, Make sure Oculus is connected, on, and the Oculus Utility and appropriate are drivers installed (not trying to be a smart ass. I’m stating this with the assumption that you’re a complete newbie like me)

In Oculus Vr Utility, set Display mode to “Extended”
-Tools -> Display Mode -> “Extended Desktop to the HMD”
Minimize Oculus Utility

Then on Desktop, Left Click On Desktop to Open the following Applications:

*NVidia Control Panel: (Make sure to hit apply and yes after changing each setting) Also make sure that you are changing the following settings for the Rift (not the computer monitor)
-Resolution set to 948×1080 (Display->Change Resolution)
-Rift should be to the Left (Display->Set up Multiple Displays)
Then Drag Rift to left of Computer monitor
-Make Sure Rift is in Portrait Mode (Display-> Rotate Display)
AND

* Screen Resolution: (also found by Right Clicking Desktop)
-Resolution set to 948×1080
-Rift should be to the Left
-Rift should be in Portrait Mode
– It’s weird, I’ve seen NVidia tell me Rift is in portrait, while Screen Resolution gives me a different orientation. Maybe I’m just crazy but make sure the settings in both Display Applications match)

Side Note: I find that setting Rift to 948×1080 while it’s in portrait mode allows me to see most of what’s on desktop screen. I don’t understand this because I thought Rift’s native res is 1920×1080 but whatever, it worked. (Maybe someone can explain because again, this is completely foreign to me)

Launch VorpX
I have the following settings checked for Skyrim: See “VorpXSkyrimConfig” picture in link below
https://dl.dropboxusercontent.com/u/22546240/VorpXSkyrimConfig.jpg

-Disconnect Xbox Controller (this will be reconnected after initially setup)
-Make launching the game easier by creating a Skyrim shortcut on desktop and putting it in the center

After Verifying settings in VorpX, and that both Display Applications settings match, go back to NVidia Control panel and do the following

-Make rift primary display
-Uncheck Computer monitor from the list of checked devices (this should turn off computer monitor forcing VorpX aided game to open in rift)

Your computer monitor should turn off and your Rift should be the monitor. Make sure to click yes to Keep Changes as the settings will revert if this is not done in a timely manner. Hopefully the desktop doesn’t look flipped or weird in the rift. I struggled with this for a while and finally got this sorted out with above settings. Again this may be different for you.

Next Launch Skyrim
-On the load screen click Ok with mouse for the health warning and then hit shift+space bar (I found that I have to hit the 2 buttons together and rapidly a few times to get the box to go away. You’ll see what I mean) This may also load your last save, (you probably won’t be able to see the options to the right)

-Once game has loaded, hit the ‘Del button’. This will pull up VorpX settings. At the top there is an arrow that lets you switch pages of the VorpX settings. I have tweaked VorpX settings on these pages and have left the other pages alone.

-Click “VorpX In Game Settings 1 and 2” pictures in link below to see settings I used.

-Make sure to click “Ok and Save” in VorpX settings menu once finished

-After filling in settings, Hit “Del” to exit out of VorpX settings

If you hit the middle wheel of the mouse, it will show you more of the screen (menus and such), click it again to zoom back in.

-Save game and Exit to desktop.

-Now plug in Xbox Controller (or not), re-launch game, and it should work. The graphics are not the best but they’re not terrible (in my opinion)

Sometimes I find that I have to exit and re-launch game if head-tracking stops working.

Sorry if this post is unprofessional, if I’ve made some grammatical errors, or if I’m hard to follow. This is my first time doing this and was a completely impulsive post. But I hope this helps someone….

[seelenmord1986]

…

[Author]

Posts