RJK_

[RJK_]

Gunship Apocalypse (G3D)

Game reminds a bit on Descent 2.

– Optimzed for Screen Modes
– Nice 3D cockpit makes flying around quite real
– Turn OFF bloom if you find a tweak for it (removes bloom effect near crosshair)
– Profile availiable from the cloud

[RJK_]

Game of Thrones (G3D)

– Normal camera sticks to screen so dont use Full VR Mode
– Profile optimized for Cinema Mode
– Use right mouse key for interesting unusual camera positions
– Using FOV mods or 3D FOV enhancement is having the same effect, so 3D FOV Enhancement is preset to maximum setting. Though you can use both together (exapmple picture 1)
– Character shadows are turned OFF by default because of visual glitches
– Profile availiable from the cloud

Note: This profile is NOT for “A game of Thrones: A Telltale games series”

[RJK_]

Since the game hasnt been in development for very long i would try some of the newer engines like unity, Unreal 4. Sometimes you can find out what engine they use when comparing to their gamelist but in this case it seems theire a new developer. Another thing you can do is to try profiles from newer games that have similar graphics styles. Using for example a profile from a typical strategy game for a 1rst person shooter wouldnt make much sense, so you can narrow your search a bit.

[RJK_]

Divinity II (G3D)

With the right settings (a bit tricky) this game looks insane in VR.

– start game and make game settings first, turn shadows down
– shut down game if you want to play higher then 1920×1080
– find graphicoptions.xml under c:/users/../Divinty 2/ ect
– replace ScreenWidth=”XXX” ScreenHeight=”YYY” with your personal resoultion
– Save the file and write protect it
– turn your monitor into that resolution you have just entered
– when starting again go into graphics settings and check if that resolution has been carried over, if not correct it. Unfortunately you must do this each time you start the game. The game deosnt seem to read the proper res. entry.- Though this way you can go as high your PC can take.
– Profile availiable from the cloud.

[RJK_]

Moorhuhn “VorpX Collection” (G3D)

For a joke ive tried the Moorhuhn games, most of them are DX7 and/or 2D /poor quality, but when they moved over to DX9 you can choose any resolution you like which makes them look quite nice in VR.

The follwing games are covered by this little collection:

– Moorhuhn Directors Cut (looks best)
– Moorhuhn Kart 3
– Moorhuhn Kart Thunder
– Profile availiable from the cloud

Note: Possibly any DX9 Moorhuhn game that came out after 2007 might work in 3D with this profile as well.

[RJK_]

Please check the framework version you have installed, For VorpX you need at least version 4.62. That might already help.

[RJK_]

Star Wars: Empire at War (G3D)

– No special settings required
– Optimzed for Cinema Mode
– Profile availiable from the Cloud

[RJK_]

Test Drive Unlimited (G3D)

This game is challenging you a bit more then ususal because it has many different settings for example depending on the drivers or camera position FOV or/and HUD needs to be fine-tuned a little.

– use HUD size and depth depending on your favorite camera/screen size
– gain/lower FOV depending on your drivers postion settings
– profile optimized for screen modes
– dont use Full VR, camera sticks to screen
– Profile availiable from the cloud

[RJK_]

I think the camera height is extremely useful especially when playing seated. At least with me slightly lowering the camera into a position which about equals the hight of a chair allows me playing way longer without feeling uncomfortable.

Thanks for the Update !

[RJK_]

Someone from the Vogons Forum suggested this game and i must say ive barely seen an old game from 2001 where you can choose any screen resoultion. No widescreen mods needed at all.

Project Eden (DGVoodoo2) – G3D

– DGVoodoo2 required
– very good 3D, turn up resoultion to the max
– i decided to optimize the profile for cinema Mode for nicer HUD, though you can play in FULL VR.
– parts of plants are rendered at HUD depth only
– Profile availiable from the cloud

[RJK_]

Sam & Max: Season 1 (DGVoodoo2) – G3D

Season 1 containing 6 different episodes. Play Sam n Max in lifesize !

– required: DGVoodoo2
– Use widescreen patcher to change to every desired resolution
– Put DGVoodoo2 and patcher in each episode folder ( Sam and Max Episode 101 , 102 ,103 ect. )
– first make ingame settings, then use patcher, then write protect prefs.prop )
– Start each episode seperately (SamMax101.exe, SamMax102 ect)
– Profile optimzed for Cinema Mode
– Download profile from the cloud

[RJK_]

Blood Knights (G3D)

This game is probably one you dont want to play on a normal monitor because everthing appears too small and you can not move your characters properly,
BUT in VR thats a whole different story ! Everything appears way larger and the char movements dont bother you anymore, very interesting to see how a game can gain in quality and handling “just” by putting into into VR.

– Staying offline while installing keeps you away from “kalypso”
– Optimized for Immersive Screen Mode
– Game opens in DOS like Window (?), close that manually after shutdown
– Profile availiable from the cloud

[RJK_]

..hope i am not boring some guys here.. May be this colourful little jump n run game can be an entry for your children into VR..

Trixie in Toyland (DGVoodoo2) (G3D)

– DGVoodoo2 required
– make vorpx shortcut to game
– optimized for cinema mode
– profile availiable from the cloud

[RJK_]

oh no wrong thread. please ignore this posting. (not the previous one)

[RJK_]

If its a hidden profile, its probably not finished yet. Though sometimes turning OFF game-shadows can solve such problems. You also can check if the S3D shadow option on the vorpx image page is present, try changing that as well.

[Author]

Posts