Search Results for 'The Thing'

[RJK_]

The two WRNs are no errors and dont mean anything important.

If you are seeing the lounge room in steroescopic 3D and only not the screen i would do the following (may be some kind of stereo inverse bug), look which key is used for Enable/Disable Stereo 3D. Push that button while the game is running slowly a couple of times. In Full VR use SHIFT+Mousewheel to see if you can enlarge your screen. Then make sure that you are running the game in the required DX mode. (Dx9 or Dx11). Unfortunately in can not tell which DX version those two profiles require. If you dont have any other games on stock you may try this demo or download these free screensavers and run HYPERSPACE. They both require a profile from the cloud, “Farbrausch” and “Really Slick Screesavers” Tell us if you get any S3D.

[Taylorig]

Hi RJK_ And I would just like to say thank you for your continued help on this. I really do appreciate it.

Ok so in answer to your first post.
I have been through the whole vorpx.log and these are the only WRN/ERR I found.

WRN: AudioHelper: No known VR playback device found.
WRN: OpenVRDirectModeManager Submit Error: 101 101

In regards to your second post. Cinema mode looks like I would expect. Big screen infront of me, sat on a couch with a full 360 room around me. The other mode just looks like the same screen from cinema mode but with no surroundings.
Like I said in Full VR Mode all I am seeing is a slightly smaller screen than the other two modes. Just not 360.

The other thing about my headset not working properly. It works perfectly in everything else I have trown at it. No issues what so ever.

Thanks again and I hope from the errors above this issue can be worked out *Crosses everything*

[RJK_]

Just for a test, another thing you can check is, how does the cinema mode “lounge” look like ? Is that a 3demensional room and youre sitting on a chair in front of a cinema screen or does it look flat (same image in both eyes) ? My idea is that the headset may not be working properly.

[RJK_]

Keep us informed if you manage to solve this.
Another thing you could try at least for debugging is find your temp folder (somewhere under c:/user/…/temp) and clean that folder while vorpx is not running. Then start vorpx , start a game that definetaly has 3D. Shut game down and go to your temp folder, open vorpx.log and see if there are any lines beginning with WRN: and ERR: – Post them here.
But as Ralf said its nearly impossibe that you dont see any 3D while the Geometry Setting is enabled.

[optical10]

@Ralph, many thanks I got the PayPal purchase option email from yourself, or was that just a coincidence that it came from somebody with the same name as yourself?
Anyway I was able to install the web setup and I’m just waiting the activation email.
Can’t wait to give this thing a try with my Samsung Odyssey + and my 2080 TI :-)

[dellrifter22]

I’ve wondered about something similar for games like Battlefield/Battlefront, Farcrys, Medal of Honor etc, when vehicle FOV is often lower than on foot. Or when riding a horse in Witcher 3. Being able to toggle a secondary set of values might help to improve this.

It could also help for switching between fullVR and cinema modes, as I’ve found they each need their own changes to 3D strength, depth weighting, and FOV adjustment to look similar.

And it could be useful for simple A B testing while creating new profiles.

Maybe the vorpX menu box could change color to signify “Alternative Config Set Active” to help avoid confusion to witch is currently being used/changed.

Neat ideas razer, thanks. I imagine this will fall into the “nice to have” list, but we’ll see. There’s still more room on that notepad, right Ralf? :)

[Taylorig]

Hi Ralf.

And thank you for taking the time to try and help me out.

Ok So I did exactly has you said. Reset and made sure I was using the offical profile for Ai. Also played with the slider for the “3D-Strengh/Scale” and it didn’t really make any noticeable difference that I could see.

I did make sure (As I always do) that MSI Afterburner is fully disabled before testing. As previously stated this is a fresh install of Windows 10 Pro x64 and the fact that VorpX worked only the first time I tested it and since then nothing has been tweaked/messed with on my end.

Thanks again for your help.

[Taylorig]

Hi RJK_

Yes I did a factory reset to start with before reinstalled VorpX. And MSI Afterburner is just a program (Which does hook also and this is why I disable it when running other software that does) that displays system information such as temps etc when gaming.

One thing I didn’t mention before was the fact that I uninstalled the Viveport software/drives which I thought might of been causing the issue due to a driver missing or something. But everything else VR related runs perfectly fine due to SteamVR. All the drivers for the Vive are still intact.

Also I have been on the latest Nvidia drivers as this system was built and freshly softwared over the xmas holidays. Like I mentioned before VorpX worked the first time I tried it as intended. Nothing changed since then in regards to anything else besides getting rid of Viveport as I’d said.

I’ve spent most of the evening again trying to resolve my issue with VorpX running as it should. I’ll keep searching and trying but appreciate the comments.

[RJK_]

Very strange indeed.
Another thing you can try is reset the ingame key bindings or make a full factory reset (under trouble shooting). And/or reset the nvidia grahips settings, that Afterburner use sounds a bit suspicious.

Have you changed your graphics drivers recently ? Go a version higher or lower or reinstall them.

[zahncisten]

Alright, so, it starts in “normal” — I’m guessing that means it doesn’t actually start in VorpX, but launches “normally” on the desktop monitor.
First, under General in the vorpX Config, make sure you have the right HMD selected. As a fallback, you could always try SteamVR if you can’t get your Oculus to work properly with VorpX. Before you may ask, it doesn’t matter that it’s a GoG game.
If that doesn’t work, and you may want to do this first, uninstall Comodo (you can always reinstall it after if this doesn’t work). You’d be surprised how often Antivirus protections are still “running” after being “shutdown”.
Another possibility is that you need to make sure that the HDMI on your HMD is plugged in to your primary graphics card.
Also, if you are running anything like FRAPS, or some overlay software (like Overwolf, Discord’s overlay, etc.), you will want to disable them.
VorpX is not the issue here, there is an environmental factor on your system. Many people have played on Oculus and have played Witcher 3 successfully. Just take a breath, and try some troubleshooting steps.

[hankybanister]

Hi there,

I must say, I’m pretty frustrated and disappointed. First of all, the hard facts: Win10, i5-6500, GTX 980, 16 GB RAM, Oculus Rift, Witcher 3 (GOG Version) installed (not on OS HD). vorpX does not attach to Witcher 3 after starting it. vorpX config is set, I created a desktop shortcut attached to witcher3.exe, I disabled (shut down) my Comodo Security Software completely, no other tasks concerning graphics is running (apart from Oculus App), but still: Witcher 3 starts in “normal” 2D mode, the Rift stays black when starting witcher3.exe, nothing happens when starting Witcher 3 via the desktop shortcut.

What am I doing wrong? Do I need to install anything else? Mods, Patches, Updates for Witcher3? Do I need to deactivate the Oculus App that starts automatically when putting on the Rift? I see vorpX control work in the background with 15% CPU load without starting any app or game, but I can’t really figure out what’s doing.

Please, I paid for this software and I don’t want to spend money for frustration… Thanks a lot in advance!

[ilkj4832z]

I checked CLOUD beforehand so that I do not make the same profile when I already have a profile that exists in CLOUD. There can not be any number of identical profiles that differ only in setting. Then I think that it is better to prepare a profile that does not have a profile yet.
Of course, there are times when there are things that are not 3D in CLOUD’s profile, so I think that it is meaningful to upload 3D in the same game.

[Taylorig]

Thank you for your input zahncisten. I have just tested with anti-aliasing set to off. Still the same. I did restart the game after setting this also just to make sure.
And yes I have tried all the different modes, z-normal, z-adaptive, and G3D.

I’m so sad at the moment that I can not get VorpX working with anything :(

[zahncisten]

So, you’ve tried switching between z-normal, z-adaptive, and G3D?
Make sure that anti-aliasing is also set to low as possible (off if possible).
Those are my immediate suggestions without knowing anything else about your situation. If you’re hooked with VorpX, and it is supposed to have G3D, but you aren’t getting it, chances are that it might be a game setting (like anti-aliasing. You’d be surprised how many times this is a culprit).
Try those things out if you haven’t already. I hope you get to play Isolation. It is SO awesome. I played it thru recently–incredible!
Anyway, happy new year!

[Taylorig]

So as the title say’s.

I am getting no 3D/360 effect at all. Just a small screen with the game running in my vive view and no matter which mode I try through VorpX ingame control panel, nothing will get it in to Stereoscopic 3d. I was as first just trying Alien isolation. Rather than switching from game to game to begin with to keep confusion/trouble shooting to a minimum. But I have also tried The Hunter: Call of the wild and this behaves exactly the same.

Things I have tried so far is to uninstall/reinstall VorpX, SteamVR and even the games themselves. Also tried Cloud profiles for the games in question.
I also like to use MSI Afterburner which I disabled straight away due to being known to cause issues in various games etc.

I’ve been through the settings so many times now and still can’t figure out what is causing this. The funny thing is that the first time I tried VorpX with Ai is worked as intended. Since then I hadn’t changed any settings within any of my software/programs but it just refuses to go in to 3d mode…

My system is well above the required VR specs needed. Hitting the required 90fps constantly for a fluid experience.

Am I missing something really simple? Thank you in advance for any information.

EDIT: Happy new all ;)