Search Results for 'Just Cause'

[HalloMolli]

auryza wrote:

I have made custom profile for Kingdom come deliverance II, go and check the vorpX cloud.
Profile was made from Starfield profile.

Thank you very much. Does the 3D effect work for you, though? I am asking because while the game is hooking and loading just fine I have no 3D (Z3D) effect whatsoever. When I switch between no 3D and Z3D there is no difference at all. How did you guys get it working? Any help would be appreciated.

Edit: Maybe worth noting: I did not rename the game’s exe, though, because Steam would generate an error after I tried it. So I had to leave the default name.

[Benedict81]

I’ve noticed this too, on my rig it hovers around 6% when nothing is running. Running the latest version 24.1 whatever… How do I revert back to earlier version? Might try that just because tinkering :) No AV, just Win Defender.

[Smoils]

I have asus 21:9 4k monitor as a single one plugged right now and if I keep it in default mode vorpx disables virtual monitor, but if I switch my physical one into 16:9 mode – vorpx virtual monitor enables again.

I am curious if just aspect ratio/resolution is to blame or something else, I can still use vorpx one way or another, it just seemed weird.

[Boblekobold]

Sorry I don’t have a Quest 2/3.

But first of all, you don’t have to apply VorpX to the game. It’s not bad, but it’s just not necessary. You just have to start VorpX or VorpX Desktrop Viewer. When you launch a game, VorpX detect the game (it recognize the executable name).

The only thing you may have to do is to import a profile the first time (only once), if it’s not an officialy supported game (if the game is listed in local profiles, you don’t have to do anything except launching VorpX).

You could start by VorpX Desktop Viewer. Does if work for you ? As the name suggest, it should display your desktop, but on a screen in VR.

What did you choose in Device Selection ?

If you choose SteamVR, I don’t think you actually need to launch SteamVR first. VorpX calls it automatically (as far as I know).

I use OpenXR because I’m on G2, but with a Quest 2, I think it would require VDXR.
I think you are supposed to use Oculus or SteamVR.
Last time I tried a Quest 3, Virtual Desktop wasn’t required (but it was a few years ago).

[Boblekobold]

I don’t know. I don’t have this game anymore, I didn’t try it with VorpX, and I didn’t use DirectVR a lot, but Ralf probably know (and maybe it’s written somewhere).

Do you have the resolution you want ingame ? It must be a very high 4:3 one.

First of all, adjust zoom level and use ClarityFX and sharpness if needed. You can try to adjust FOV (not only resolution).

If I encounter a problem I can’t solve, I usually disable auto settings (checkbox “Don’t Optimize Game Settings”), and choose the resolution and FOV myself (most of the time I have to do it anyway because I play games without DirectVR, and most of the time it doesn’t take long because it’s almost always the same values). But ralf proved me recently it may break other things to disable auto settings with this kind of advanced profiles. You can always try if nothing works. Set a FOV around 112 and the resolution as you would if you weren’t using VorpX (in game options, cfg/ini files, etc.)

When it works, you’ll probably be able to identify what was the problem, and re-enable auto settings if you need to.

PS :
changing Titanfall 2 FOV manually seems to not be very easy, but it seems to be doable.

[Boblekobold]

I think I did. I was in Full VR anyway, so it’s always centered (without edgepeek) as far as I know.

I used my original version of the game (not current Steam version), and no mods (at first).

I’ll retry the game later. There are a lot of other games to play (Stalker 2, Frontier of Pandora, etc.), but I wanted to warn you because some people could want to try VorpX with old Stalker games because Stalker 2 just came out.

—–

Is DX11 supposed to work ? In Z3D at least ?

[Boblekobold]

Usually, beginners prefers Cinema Mode or Immersive Screen mode.

1) Cinema mode is exactly what you’re asking for (like a giant 3D screen in your home). So try it. You’ll probably want more immersion with time, when you’ll get used to VorpX and realize the potential.
(You don’t have much to configure, except 3D type and strenght, distance/size of the screen, ClarityFX, Sharpness, Gamma and Saturation).

2) Immersive screen is still a giant screen, but is a more advanced mode, somewhere between Cinema and Full VR. It let you tilt down screen, curve horizontally and vertically screen around you (which is better with high resolution and FOV), unzoom instantly with edgepeek, etc.
You can add some limited head tracking if you want (you can disable it with “headracking Speed” at 0).

You should use Immersive Screen mode at long distance when you can’t reach a very high resolution (at least 4k), but it’s also great with high resolution and FOV at short distance because you can then curve screen around you and see every detail of the game with a very good immersion.

It’s great to play TPS, but it can also be very good with FPS (it’s often clearer/sharper than full VR, especially at low resolution). It’s easier to see HUD in this mode, and if game camera movement are limited or locked, it will be a lot more comfortable.

3) Full VR can be the most immersive mode with first person games but it’s the most difficult to configure, and if you don’t configure it perfectly, you probably won’t like it.
Maybe you’ll like it more when you’ll get used to VorpX.
First of all you need to adjust the FOV and resolution, so the exact method depends on each game. Some games are very easy to configure (like Bioshock Infinite), other aren’t. Some games can’t be perfect, depending on your VR headset (but most games can run in 4:3 with 105-110 FOV so most games are good on Quest 2/3 and Reverb G2 or other 4:3 headset with low FOV).
Zoom level is very important too.
Some games are partially (or completely) automated (you can launch a DirectVR scan to configure automatically, and then just adjust resolution or else if you need to).

[Ralf]

I see. Did you try to recenter the view (ALT+SPACE)? Sounds like maybe the center position is just off. Otherwise I‘m not really sure what may cause this issue for you.

[Woobisan]

Hello,

Im new to vorpx, i just got it yesterday and i really like it. So here is my issues The HUD, weapons and arms/hand are not showing up. It was fine until i did a scan and now they are gone. Dont know if it is a profile thing or not, i also in Fallout 4 adjuested my FOV to 90 thinking i have to fix the FOV because of this. If anyone can help please let me know.

Thanks in advance

[Benedict81]

Ok, I have to get back to this headset FPS thing. Last night I noticed a weird behaviour with this. Played Homefront The Revolution and Prey and with both games I get those moments when the headset FPS just suddenly drops (to very low, like 10-20 FPS) and I noticed that what fixes this is to just move my head, look around a bit and boom, FPS goes back to full! Im at loss with what might be causing this. I usually turn the headtracking off cause I just like to look around with the mouse. Any ideas? The HMD is Pimax Crystal with the latest updates (got rid of the PimaxXR software coz Pimax integrated this into Pimax Play -tool recently).

[Ralf]

Just briefly chiming in here to strongly recommend the regular version. Runs faster, doesn’t really look considerably worse, in some parts even better as others pointed out, and most importantly comes with a profile that has various DirectVR features: 1:1 head tracking, FOV, resolution. All covered automatically.

The marginal improvements of the ‘Enhanced’ version (almost certainly produced mainly because of some RTX marketing money) are not worth the fiddling compared to the ease-of-use with the regular version profile, even more so considering that the enhanced version has significatly worse performance with RTX enabled.

[Laser]

brown66 wrote:

Amd processors often perform poorly in Bethesda RPGs because these games often have a lot of draw calls. Interestingly, one of the few games where the Ultra 285K performs well is Starfield. Also, Intel processors are generally superior in VR….

I don´t know about that “superior” part, atleast when talking about X3D chips, and even in skyrim X3D seems to be doing pretty good. Unfortunately vr benchmarks are hard to find.

285k just seems to sucks outside some outliers like starfield, even the 14900k beats it in most cases.

[Boblekobold]

There is also a direct shortcut option, but I don’t think it’s compatible with Virtual Monitor when needed.

I have some problems too since I switched to V24 (and sometimes Virtual Monitor doesn’t hook, but It may be just me, because I tweaked some things ?)
I think Ralf said to not do that (so maybe don’t), but you can simply restart VorpX Service instead of your computer. I works for me.

Concerning framerate, the information must be somewhere on the forum. Did you see you have options to cap framerate ? And sync options like Judder Protect ?
It has an impact on framerates.

I think VorpX don’t need the game to reach high framerate to feel smooth because of this double framerate mechanics.

[moblackny]

I have had vopx for about 10 days now and have yet been able to get it too work. I have contacted support and have followed all of the suggestions they gave but no luck. seeing if anyone here can help. the errors I get is no oculus headset found I have the meta quest 3. Also getting the failed to attach exe. I have check to make sure nothing that can interfere with it is running. these are the steps I am doing. please let me know if they are not correct as I am new to this.
1. opening vorpx config selecting oculus as device
2. going to local profiles and selecting the profile for the game I am trying to use and clicking apply and close
3. powering on the meta quest 3 which is connected via link cable to pc meta quest link software loads and says connected (although I have read that I should close the meta quest software because vorpx will detect without it so I have tried both ways)
4. Then clicking on the shortcut on my desktop for the game I want to use. (although I have read that I shouldn’t and I should start the game through vorpx but have yet to see a option to do so)

I get attaching said exe then attaching exe failed then the menu option comes up where I can choose to install helper or preferred helper which I have tried both then I get no oculus headset found.

this is a 6 week old powerhouse windows 11 pro computer with more then enough hardware to run any game at max settings $2000+ 48GB ram RTX4060 TI MSI b760 4TB Samsung 990 pro with heatsink

I do have dual monitors which I just read this morning that this can be a possible issue so I have yet to try disabling one of them about to leave for work so don’t have time to try this. if anyone can assist it would be greatly appreciated. Games I have tried are Dirt 3, all GRID games, WRC Generation and Call of duty modern warfare.

Also just checking when they say to make sure there are no conflicting software running they just mean to stop there processes in task manager not uninstall them. I know that is a no brainer but I have spent over 30hr in 10 days trying to get this to work so I want to make sure Im not missing anything. I consider myself to be a above average computer technician and troubleshooter but this has me stumped to say the least.
Please HELP someone

[moblackny]

I have had vopx for about 10 days now and have yet been able to get it too work. I have contacted support and have followed all of the suggestions they gave but no luck. seeing if anyone here can help. the errors I get is no oculus headset found I have the meta quest 3. Also getting the failed to attach exe. I have check to make sure nothing that can interfere with it is running. these are the steps I am doing. please let me know if they are not correct as I am new to this.
1. opening vorpx config selecting oculus as device
2. going to local profiles and selecting the profile for the game I am trying to use and clicking apply and close
3. powering on the meta quest 3 which is connected via link cable to pc meta quest link software loads and says connected (although I have read that I should close the meta quest software because vorpx will detect without it so I have tried both ways)
4. Then clicking on the shortcut on my desktop for the game I want to use. (although I have read that I shouldn’t and I should start the game through vorpx but have yet to see a option to do so)

I get attaching said exe then attaching exe failed then the menu option comes up where I can choose to install helper or preferred helper which I have tried both then I get no oculus headset found.

this is a 6 week old powerhouse windows 11 pro computer with more then enough hardware to run any game at max settings $2000+ 48GB ram RTX4060 TI MSI b760 4TB Samsung 990 pro with heatsink

I do have dual monitors which I just read this morning that this can be a possible issue so I have yet to try disabling one of them about to leave for work so don’t have time to try this. if anyone can assist it would be greatly appreciated. Games I have tried are Dirt 3, all GRID games, WRC Generation and Call of duty modern warfare.

Also just checking when they say to make sure there are no conflicting software running they just mean to stop there processes in task manager not uninstall them. I know that is a no brainer but I have spent over 30hr in 10 days trying to get this to work so I want to make sure I’m not missing anything. I consider myself to be a above average computer technician and troubleshooter but this has me stumped to say the least.
Please HELP someone