Forum Replies Created
-
Posts
-
It’s a shame that part 3 doesn’t want to hack in … maybe someone can fix it! Part 1 + 2 have really fantastic G3D and run with Vorpx AMD sharpness filter on full … super sharp and fluid!
By part 4 I meant of course
“Mass Effect: Andromeda” …
I used the cloud profile and got a very good G3D … !!Doesn’t work with Vorpx either … no G3D and no Z3D …
Then I tried Reshade Depth3D … with that I had a good Z3D with some depth …
Maybe someone will find a working Vorpx profile …?!Part 1 and 2 of the new version work great in G3D 1080p and the AMD sharpness filter … with my Pimax 8KX … looks fantastic …
Part 3 is on strike and does not want to hack in … strange … Maybe someone has advice … ??Part 4 also works well in G3D, but not quite as smoothly …
Unfortunately you cannot upload screenshots here in the forum … but under this link, the last post from “Thomas-3D”
https://vrforum.de/threads/elite-dangerous.582/page-322#post-137747
Elite Dangerous Odyssey
just like the last two Tombraider Shadow games, it has support for native real geometric 3D …
!!! … even with a 3D depth control for individually adjustable stereo 3D depth …Simply set Side by Side in the options … then set the depth of the room according to personal preferences … and you can start using a 3D projector or VR glasses …
I think VorpX supports this native 3D in Side by Side … just needs to be set somewhere …
I’m going to test this out today …Otherwise, Virtual Desktop is also possible if you press F6 or F7 for 3D … and F10 for a possible reversal of the eye dominance … i.e. when the left eye sees that of the right … so wrong 3D …
In any case, VorpX works with Tombraider Shadow … then Elite Dangerous Odyssey will also work …
Sooo wrote to the modder in Discord and had an informative discussion … they gave the tip that the 3D depth can also be set via SteamVR … I didn’t know that before …
Was totally surprised that it worked wonderfully …
Finally all objects outside with a fantastic 3D spatial depth … !! … a feast for my 2 (3D) eyes … when everything flies away from you in the explosions … or the trees topple over into the room in three dimensions. … then the plumes of smoke the dust when I look down on my feet from a height of 30m … great 3D depth and much more immersion … than just having the cockpit in 3D … and only 5m outside Depth graduation … instead of 100m now … In any case, with this setting in SteamVR, I am fully enthusiastic about the VR Mod … !!
If you want to try it out … here is a screenshot of Steam VR settings …
I then set it to extreme and turned the slider to the left to 10% …
The whole thing has one disadvantage …
The cockpit has now shrunk a lot due to the much larger stereo base or eye relief / IPD … but you have the outside view of the mech and can still aim very well with the mouse and the target crosshair …Don’t give up … I also hacked around with Helixvision for a few days … until I found out that I mistakenly copied the mod with vk3dvision without the main folder into the game directory of Doom Ethernal …
There are also enough Youtube instructions from the modder “Helifax” … eg a profile has to be created for Doom Ethernal in Helixvision … and Helixvision has to be entered in the vk3dvision ini file … but everything is in the readme instructions …
It also took until Helixvision was running with my VR glasses … only the one beta with the “c” is allowed …
Much luck…The last two Wolfensteins can now also be played in G3D with vk3dvision …
Look fantastic too … !!Doom Eternal runs with “Helixvision” and “vkvision” in real G3D and looks fantastic!
Unfortunately, VorpX does not support Vulkan games.Tried the VR Mod … runs great with the HP Reverb G2 and Pimax 8KX …
The only downer is the fact that the cockpit looks great in 3D … but the view to the outside then everything appears in flat 2D …The Mechs are huge, but the 6.5 cm eye relief only allows the cockpit to appear in real 3D … although even with only 6.5 cm eye relief, a flat 2D to 3D depth perception or depth graduation is still up to 50 m is at least perceptible …
As beautiful as the mod is … but as a “3D fanboy” I prefer the fantastic individually adjustable 3D depth as is possible with VorpX or even deeper with Tridef or even more precisely with regard to shadow correction with Helixmod or Helixvision … !!!
Unfortunately, the VR Mod doesn’t have an exterior view either …
I will write to the modder whether he can integrate a variable 3D depth and an exterior view … even if this gives the cockpit too great a 3D depth or separation … but as a possibility to individually set it … would be quite great … then the VR Mod would be perfect !!Greetings to all
3D and VR fans !!I tested the game some time ago to see if it runs in 3D …
Now I don’t know exactly which profile I used …
But I still remember one thing … it looked fantastic in G3D … real feeling like in the 3D Bluray film Mad Max Fury Road … !!Doom Eternal and Doom 2016 also work well with Reshade Depht3D with very good 3D depth in Side by Side with Virtual Desktop … !!
It’s a shame that VorpX doesn’t work …
I don’t know the program Vk3DVision app, yet … if the real G3D can do it then I have to test it today … !!
Thanks for the tip !!That would interest me too.
Maybe this link will help you…
