legaiaflame2

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 36 total)
  • Author
    Posts
  • in reply to: Ys 8: Lacrimosa of Dana (What is the game engine?) #180180
    legaiaflame2
    Participant

    Well, I don’t have the game yet. If anyone wants to start testing profiles that would be great.

    legaiaflame2
    Participant

    Yeah, I’m glad I found a way to make the 3d work. Already been playing a bunch of games!

    I’m not sure about improving the framerate other than the things mentioned above. I know that if you use software mode you can’t upscale the graphics and everything becomes a bit blurry. It’s best to use Hardware mode with 2x resolution if your computer can handle it. If anyone else knows any other tricks let us know. Also, go to Config/Emulation Settings/Speedhacks and make sure you enable all of the speed hacks. But, maybe in your case, try disabling some of them and or setting VU Cycle stealing to 0.

    Anyways, these are the best VorpX settings to get the best view with PCSX2:

    -Game is best viewed in Cinema Mode
    -Use Z-normal for 3D
    -3d strength, Depth Weighting and Focal Distance set to max.
    -Screen aspect ratio should be set to 16:10
    -Click on “More Cinema Settings”
    -Set screen curvature to 3.00 or max

    in reply to: STALKER Shadow of Chernobyl doesnt work in Vorpx #179908
    legaiaflame2
    Participant

    Press Delete on your keyboard while in the game to open up the vorpX menu. Play around with the various settings. Maybe try Cinema Mode? Or one of the other modes. And I think you should be able to paly around with the field of view in a few of those video modes…

    in reply to: Just got VorpX and 3d working with PCSX2 (PS2 Emulator)!! #179804
    legaiaflame2
    Participant

    Also, if you encounter graphical glitches during gameplay or during cutscenes, lower VU Cycle stealing back down to 0.

    And just a reminder: Set the renderer to Direct 3D11 Hardware. Also, try to at least set the graphics to 2X Native (3X for better quality picture/resolution, if your computer can handle it).

    Lastly, If you have Steam and are using an XBox 360 controller make sure you go into the Steam launcher, go to “Big Picture Mode”/Config/Controllers and uncheck all controller options. If anything is checked you will have controller issues.

    in reply to: PCSX2 1.4.0 (PlayStation 2 emulator) #179560
    legaiaflame2
    Participant

    Also regarding PCSX2, use Z normal for 3d. And If you need to improve the framerate you can also just set the resolution to 2X.

    in reply to: Just got VorpX and 3d working with PCSX2 (PS2 Emulator)!! #179559
    legaiaflame2
    Participant

    Also, use Z normal for 3d.

    in reply to: Just got VorpX and 3d working with PCSX2 (PS2 Emulator)!! #179551
    legaiaflame2
    Participant

    If you need to improve the framerate you can also just set the resolution to 2X.

    in reply to: Final Fantasy X HD Remaster #179375
    legaiaflame2
    Participant

    If you see that the 3D keeps turning off and on, that means you have to go back into the “configure VorpX icon” and go back into the general tap and uncheck save, then re-check and save the “alternative hook in method” setting.

    Then load up the game from the FFX.exe file until the 3D stays hooked in.

    in reply to: Final Fantasy X HD Remaster #179374
    legaiaflame2
    Participant

    If the 3d doesn’t stay hooked in just keep trying to use the alternate hook in method, save and close out of the configure Vorpx interface and keep loading up the game until it works.

    in reply to: Final Fantasy X HD Remaster #179274
    legaiaflame2
    Participant

    Also, make sure to launch from the installation folder with the .exe file (FFX). If you launch from the desktop icon and the 3d doesn’t stay hooked in, you might have to uncheck “Alternate hook in method” in the General tab save changes and then re check it and save changes and then relaunch from the installation file as stated above. So it stays hooked in.

    in reply to: Final Fantasy X HD Remaster #179216
    legaiaflame2
    Participant

    I got the 3d to work slightly. Or as best as we’re going to get I guess. Unless anyone else want’s to take a crack at it. None of the Quake profiles worked.

    What I did was: I used the “Alternative Hook in method” and I made a profile based on the game “Unravel”. Also I checked off and used the “Expert Settings”, found in the general tab.

    The game is best viewed with “immersive screen” or “cinema mode”. Use z-normal for 3d reconstruction. Have 3d strength and Depth Weighting set to max. Finally, just turn up Focal Distance no more than 10.

    It looks 3d now, but I have a feeling it could look better than this. But I guess it’s better than nothing…I uploaded the profile to the cloud as “Final Fantasy X HD Remaster” if anyone want’s to check it out.

    in reply to: Final Fantasy X HD Remaster #179198
    legaiaflame2
    Participant

    What is the alternative hooking method and how do I do it?

    in reply to: Final Fantasy X HD Remaster #179190
    legaiaflame2
    Participant

    Unfortunately, Orcs and Men didn’t hook in and the other Silk/Phyre games aren’t in the VorpX profile list.

    So, how would I go about telling FFX to work with OpenGL? I don’t see the option in settings within the game…

    in reply to: Final Fantasy X HD Remaster #179183
    legaiaflame2
    Participant

    The only PhyreEngine game that hooked in was Unravel but I didn’t get the 3D to work. Are there any other engines or profiles that could work with FFX?

    Anyone have any other suggestions? I was so close…

    in reply to: Final Fantasy X HD Remaster #179148
    legaiaflame2
    Participant

    I just found out that FF10 HD remake uses the PhyreEngine. If anyone wants to try to get the game to work, here is a list of game profiles to try it with:

    http://rjkole.com/gamestuff/engines/index.php?selengine=PhyreEngine

    I’ll eventually be trying them out in the near future. But, in the mean time, if anyone can figure out if any of these works, that would be great.

Viewing 15 posts - 1 through 15 (of 36 total)