Search Results for 'Cyberpunk 2077'

[abeardedpirate]

Have a PSVR 2. Installed the free mod to see what this is about.
In settings selected SteamVR since PSVR is using SteamVR app.
Launch game. SteamVR never brings up the game. Can see game if going to desktop mode or theater mode.
While game is open no inputs work. No keyboard inputs, no gamepad inputs, no inputs from my PSVR2 controllers.

I have uninstalled the mod, the game, fresh reboot, installed the game, rebooted, installed the free mod, fresh rebooted again and everything in between. The game will never register inputs. My keyboard does work as I can press Windows Key and get the start menu up to do other things. I can also hit the PS home key to bring up steam interface so I know my buttons work but they are not registering with Cyberpunk itself.

I uninstalled the mod and selected default on every setting inside of cyberpunk 2077 before rebooting and reinstalling the mod just to make sure everything is good. Since there is 0 interface with the free mod the only way I can get the VR selector up (Steam / Meta / Other) is to just reinstall the mod again.

I’ve launched Cyberpunk 2077 letting it open Steam VR and I’ve launched Steam VR and then opened Cyberpunk with no luck.

I went on Steam settings and have enabled steam input override for Cyberpunk 2077. I’ve tried it disabled and enabled same issue both ways.

I’m on an i9900k with a 2080ti with the PSVR2 plugged directly into my 2080ti. I haven’t had issues with other actual VR games/programs but I can’t make this work. Nothing seems to do anything. Delete / left button + right button / and L3 or w/e gamepad is nothing brings up any settings like the mod installer says it does.

Any help would be appreciated cause I feel like I’ve exhausted all the troubleshooting steps I’ve seen on this forum at this point.

[fitprovr]

For Cyberpunk 2077. I can’t get my quest 3 to go to VR with all of the steps. It stays in flat screen but all of the controls work. I’m not sure what else to do. All the configurations seem fine. Headset, controllers, and gesture settings all work in game, it’s just stuck in flatscreen.

[jhnnassky]

Could not edit the previous message.

For those who has Steam version.
1. Copy a new .exe file and rename like Dead Space 1.exe
2. Download SteamEdit
3. Change the launch profile with different .exe name from 1st step.
4. Click on Save & Apply & Restart. It affects to both SteamEdit and Steam
5. Run game. Verify on Task Manager that game is run with new name.
6. Create a new profile for vorpX game derived from Cyberpunk 2077 (because the game uses directx 12) and set the running process. Then you can rerun the game. vorpx should attach correctly.
7. For changing FOV you can you Chat Engine. You can find the profile from googling.
8. Get terrified.

[jhnnassky]

On example for Dead Space game.

For those who has Steam version.
1. Copy a new .exe file and rename like Dead Space 1.exe
2. Download SteamEdit
3. Change the launch profile with different .exe name from 1st step.
4. Click on Save & Apply & Restart. It affects to both SteamEdit and Steam
5. Run game. Verify on Task Manager that game is run with new name.
6. Create a new profile for vorpX game derived from Cyberpunk 2077 (because the game uses directx 12) and set the running process. Then you can rerun the game. vorpx should attach correctly.
7. For changing FOV you can you Chat Engine. You can find the profile from googling.
8. Get terrified.

[jhnnassky]

For those who has Steam version.
1. Copy a new .exe file and rename like Dead Space 1.exe
2. Download SteamEdit
3. Change the launch profile with different .exe name from 1st step.
4. Click on Save & Apply & Restart. It affects to both SteamEdit and Steam
5. Run game. Verify on Task Manager that game is run with new name.
6. Create a new profile for vorpX game derived from Cyberpunk 2077 (because the game uses directx 12) and set the running process. Then you can rerun the game. vorpx should attach correctly.
7. For changing FOV you can you Chat Engine. You can find the profile from googling.
8. Get terrified.

[Django9898]

Ralf wrote:

Please make sure that your CP2077 controls are also set to default and you do dont use any tool/mod that affects input. Under normal circumstances everything is preconfigured correctly out of the box.

I found the problem.

Go to Steam library/ right-click on Cyberpunk 2077/Settings/Controller and in the drop-down menu activate Steam- Input.
Now the controls are fully working as a gamepad.

[mr.uu]

Really amazing how good Cyberpunk 2077 looks in VR with this free(!) mod.

I have a 3090/5800x3d/Pimax Crystal and if i check with fpsvr my CPU is limited to below 50fps? So my CPU seems to be the bottleneck? Also i get the stutters when turning with the controllers, just read that i have to check the fps ingame with ctr-F and watch the second number – will do that tomorrow.

Question: does an upgrade to a faster CPU like a 9800x3d eliminate the CPU bottleneck?
What CPU Performance do you guys with a faster CPU like an 7800x3d have? I do want to stick with my am4 platform as long as possible, but if this game forces me to upgrade…

BTW., i have the vorpx quality settings at max, ingame most at med/high, no rt, dlss4 performance. Vorpx framerate cap at 50% and headset at 90Hz. Somehow the ingame aspect ratio is 16/9, so many pixel wasted. Should i set the i game resolution to a 4:3 one?

I really want that CPU limit gone and a smooth controller turning! Should i try to run via OpenXR and use Pimax eyetracking with quadview rendering to gain a few fps? Does it even work with vorpX DirectVR?

So much tinkering possible…but the result is breathtaking! Thank you Ralf!

[blitz]

Hello,

Wanted to ask if Mod Manager would be supported as to allow VorpX to correctly hook Cyberpunk 2077 of it being launched by Mod Manager. I have added a lot of mods and additional jobs/missions and would like to utilize VorpX with Mod Manager and Cyberpunk if at all possible.

[Boblekobold]

I don’t know if there is another game with CryEngine DX12.

There probably will be a profile someday.

You can try other DX12 games : Cyberpunk 2077, Frontier Of Pandora / Resident Evil Village, Atomic Heart, etc. but it’s not CryEngine.

[flamefury42]

Can anyone tell me what vorpx version I should be running to get a good 3d effect for cyberpunk. I’m really trying to weigh my options with trying to get the most out of CyberPunk 2077 in VR. I’ve tried luke ross and it can be choppy in some areas. When I say which vorpx version, should I be using the free version(the free download for cyberpunk) or my paid version of the Vorpx app? Does one offer 3D over the other or is it still going to look flat regardless of version?

[amcco1]

I am running Cyberpunk 2077 v2.13 and it is crashing as soon as the game launches.

I am getting a popup saying that the mod was built for 2.12 and doesn’t support 2.13.

Will there be an update to resolve this?

[dagondev]

Hello,
whenever I’m using standalone or general version of VorpX, I have the same problem. Game opens fine, I have everything working in VR. But as soon as I click on the game to make game focused game will crash in an instant or in a minute. If I happen to run game in the background then I’m able to enter into game and actually play (with gamepad) but there is a problem with aiming for example.
Game crashes on main menu as well as loading screen or in game, as soon as I bring focus to Cyberpunk 2077 window.
Antivirus was turned off, all the overlays and other programs that may interupt as well. VorpX is working for me on older game like Bioshock DX9.

What should I do?

[tjpblue]

What I’m working with:

QUEST 3, i9, 32gRam, 4070 RTX
– COPY of Updated Vorpx CYBERPUNK Standalone mod dated SEPT 2024
– Copy of CYBERPUNK 2077 2.13 + Phantom Liberty

Everyone remembers what happened the dreadful week of the the infamous 2.13 update drop.
Many solutions were sought. Many things wouldn’t work no matter how closely defined my actions were to the instructions concerning CET and the like.

I was ecstatic that Ralf powered by Vorpx, or rather Vorpx powered by Ralf – was quick to update the stand alone mod and link. In my neck of the woods internet is non existent so after installing and and reinstalling with fixes in different combinations and orders it took forever each time I got exhausted – you have no idea how slow of a connection lol
I looked forward to downloading CP2077 what I thought would be the final time and began to install the new updated standalone {all smiles}.

Unfortunately I was stuck in the game waiting room , with the same message of “my version of cyberpunk being newer” ..etc etc. Realizing it could be a false message (see above if it linked properly) I sought to continue : However I noticed that I wasn’t able to use either the keyboard or Quest 3 controllers to continue. I was able to use the grips to use the vorpx configuration menu ( open and close the menu) – that was it. I changed a few settings in vorpx menu – gamepad back to keyboard etc – Mouse was only working in vorpx menu. upon closing the menu AND after the opening intro movie I would get a message saying {!} CONTROLLER DISCONNECTED Please Reconnect controller.No controller buttons or keyboard would work (other image if posted correctly)- I Never post to Forums, as most threads seem a spiral into condescension to the poster -Among other things Im embarrassed I cant figure this out – and reading comments on videos expressing that it worked first try no fuss no muss – Im pulling out what 3 hairs I have left on my head. Ive tried everything – I, in my heart think its got to be something I’ve overlooked, or accidental setting change.
**Headset selection on The –CyberpunkVR config link — oculus headsets , rift , Quest via Oculus link is selected** (I’ve always used questlink for this game with unfailing great results)

If anyone can Help, I would owe you my soul.

Thanks in advance,

TJP
A Tenacious enthusiast even after a wrong turn or two

[gunn4ever]

Hello all,

i’m considering buying VorpX so that my father can play Avatar Frontiers in VR as he loves that universe.

Does the game currently works well in full VR, like cyberpunk 2077 full VR 3D and what would be the best settings or tweaks that i would need to do?

thanks :)

[Ralf]

Just like any other CP2077 mod the standalone mod version has to be removed to disable it.

The full version only activates itself while vorpX is running. Make sure to use the 24.1.0 cutting edge build that is liked on the front page. That one has all the Cyberpunk features of the standalone mod, the last regular build doesn’t.