Search Results for 'Crysis 3'

[seaody]

Hi,
I have been tying to configure Fallout 4 on the CV1 but everything looks flat like I am just playing on a giant monitor with no 3D. I have tried the game settings optimizer and local/cloud profiles. The vorpx ingame settings don’t make a difference and it’s the vanilla game. I had the same problem with crysis but I just used the game settings optimizer and it fixed it. There is also a giant gap on the bottom and smaller ones on the top and sides. The edge peek is off so it is not creating them and I have re-configured the rift sensor and the center positional tracking multiple times but that doesn’t seem to make a difference. Are there fixes for these problems?

Thanks

[bitmag]

Hello! I just purchased vorpx and started my arma 3 with it. I’m using oculus rift cv1. Everything went fine except my weapon is moving with my head – just like I would do it with mouse normally. How to make my head move separately? I want to move my body with weapon by mouse and I want to move my head using oculus tracking system. How to setup it?

[Vlad]

I have the same problem. ‘i installed crysis 3 but on vorpx mode i got error when i enter campaign .
Crysis 3 has stopped working.[Close the program]’

[TenaciousJ]

These aren’t all FPS games, but are excellent picks:

The Vanishing of Ethan Carter is AWESOME in VR if you’re into mystery adventures
Elite Dangerous if you like space exploration games
The Elder Scrolls Series – primarily Skyrim.
Fallout 4
The Batman Arkham Series
Metro 2033
Call of Duty Black Ops 1-3, Battlefield 3-4 and even Hardline, Any Splinter Cell or Crysis game
Alien Isolation
Quake I-III
Half Life 2
Portal
The Witcher 1 and 2 if you like extended campaign games that will suck all your time, not sure if Witcher III is manageable at acceptable graphics levels
Bioshock: Infinite
Borderlands
GTA IV and V
and to tickle your fear of heights check out Mirror’s Edge

Essentially if your computer can run it, and it’s built on a major game engine like Unreal, Unity, and quite a few others – it’ll play in VorpX. The less popular it is the more tweaking you’ll have to do though because it won’t have been done already by someone else. Once you get used to the Vorpx in game menu you’ll be able to get games to run. Whether you get a true stereoscopic experience depends on how the game was coded though.

I’m sure that’s clear as mud now.. lol. But hopefully there are a couple of games on there you can check out that are well established as compatible.

VorpX Supported Games

[hamedham]

i installed crysis 3 but on vorpx mode i got error when i enter campaign .
Crysis 3 has stopped working.[Close the program]
what should i do?

[tig3rmast3r]

so basically it’s not possible to merge the injectors right out of the box (i’ve dreamed for a bunch of minutes!!)?
i’m a very long time 3d vision user too and would be great to use their hard work in order to fix and extend the geometry 3d support here on vorpx.
z-buffer is exactly like mikearms has said “cardoard cutouts at different depths” (with free halo artifacts here and there), not to mention the low 3d effect too.
This trend started up with crysis 2 and it’s become a pain as lot of games now has that “compatiblity mode” so lazy developers can claim 3d with no effort. honestly z-buffer has nothing to share with a proper dual rendering.

i’ve never played a z-buffer game, i had so bad times with crysis 2 and i promised myself not to play anything else with fake 3d.If i have to play fake i prefer 2d.
I’m playing crysis 2 right now that i have a gtx1080 and finally i can enjoy a true 3d without losing too many frames and/or lowering too many details.

i did the same many times, waited until my hardware was powerful enough to get the most out from the 3d experience.

performances are not a problem, it’s just a matter of time, and you will be able to play it sooner or later.

[Los-Problemos]

If only VorpX would support Crysis with VIVE and the Motion Controllers. I would buy the program immediately!

[Ralf]

Probably a concidence.

Multiple games (Crysis, Skyrim, Fallout 4, Aliens Colonial Marines, Deus Ex Human Revolution, GTA V, Star Wars: Battlefront) were tested here instantly after the original report (Oculus App Version 1.4.0.224375 (1.4.0.224996)). On two machines, with both CV1 and DK2.

Since also the other user could solve his issue it’s quite safe to say that your issue must have another cause – despite incidentally occuring after you updated Oculus Home.

The most common cause of vorpX not hooking is an injection conflict with some other program on your PC. The best way of trouble shooting in this regard is closing down every background process that would not be there after a fresh Microsoft only Windows install.

You can check logfiles by creating a trouble shoot data archive in the vorpX config app. Besides system information it also contains a logfile.

[crysisheld]

Karlor wrote:

crysisheld wrote:

As long as the developer (one man project) insists on doing everything himself and not adding an option that you can add custom profiles I think this would never happen.

I liked vorpX but as further updates which add new games only there to get new customers who don´t have VorpX already I hardly think Ralf will add such an option to his software.

It´s all about the money you know. Even this stupid copy protection makes me mad as I bought it and when you re-install it on the same system it changes the code you have to send to him. That is ridiculous as the copy protection checks for changes in the reg – and everyone knows as soon as you install or uninstall something the registry has been altered… so I am no longer supporting this software and hope that the new Oculus will be as good that I don´t have to be dependent of VorpX anymore.

Yeah that’s not true… vorpX adds new games as often as old games. The additions of features from when I bought it till now is 20 fold probably. Tell you the truth when Oculus decided to just dump direct mode and leave a lot of devs just kinda hanging and vorpX kind of had to be rebuilt to work without direct mode. Up until then things were crackin up in this beezy dude with all kinds of updates. I’m sure I’m over simplifying it but you get the idea. If your butt hurt be butt hurt at Oculus for jerking people around every other month about something new* or straight up lying about prices, lying about support, lying about games, lying about features… The truth is all games are a little different. It’s those little things that vorpx does for you 90% of the time. It’s those little things that take a lot of time to tune in and code and make work for each and every individual profile or game. Windows 10 also is having all kinds of issues I’m sure they are trying to get that handled too. If you haven’t noticed most people/devs are having issues with windows 10 (surprise-surprise) so that’s not really vorpx fault either.

Even if vorpX bounced tomorrow Ive gotten my moneys worth that’s for damn sure. That’s not to say I wouldn’t love faster more plentiful updates but hell I’d also like to not be charged $700 for a cloth wrapped head set you cant clean and comes with a bunch of crap no one wants(forced games, controller, goofy as hell headphones, no vorpx like support so you cant play your fav games only mostly shit ones from oculus store)… I could go on and on about how much I don’t like oculus but the point is vorpx is pretty damn sweet.

* the word new does NOT men something better, or true, or wanted…

Dude, no offense! I never said that this is a bad software. I bought it becauese I needed it but! and here is what I mean the updates of the games supoorted by vorpx should grow faster. I don´t need new technical updates of Vorpx every week. But at least new profiles for new released games. It shouldb´t be too much word to add 3 or 4 games a month.

[vrgamegirl1984]

I fixed my issue. Instead of using the shortcut I used the exe in the main directory and unchecked (run as admin) in the properties of the exe.

Outlast looks GREAT!!! Omg! But I can’t really play long because I wear glasses and ouch, it hurts my face. 😪 I get nauseous easy to. but I screamed a few times and it was way more intense. G3D looked amazing! No issues. Has to set the IPD like 5 less than my actual IPD though. and changed the screen zoom out a bunch.

I wonder why crysis 3 wasn’t working 😒

[Mapaxius]

vrgamegirl1984 wrote:

I just bought VorpX so I could play Outlast, but when I try and start outlast it just starts on the PC, not on the DK2. I got Crysis 3 working, (It looked like crap, all zoomed in made me cross eyes on G3D. But anyway, I thought I would try Outlast. Please help! I Have the latest Oculus run-time and the newest vorpx because I just bought it.

I think I have a similar issue, does it crash at startup? I bought it some weeks ago, and I still can’t get it to work, everyday I am trying something new, If I am lucky i will get it working before February.

[vrgamegirl1984]

I just bought VorpX so I could play Outlast, but when I try and start outlast it just starts on the PC, not on the DK2. I got Crysis 3 working, (It looked like crap, all zoomed in made me cross eyes on G3D. But anyway, I thought I would try Outlast. Please help! I Have the latest Oculus run-time and the newest vorpx because I just bought it.

[Grumdark]

Crysis 1:Yes, I have made the right step to run under DX9, and reconstruction geometry is represented in the game, the problem is that it presents hight graphics problems.
z-modes seems to work properly.
Previously,I did not happen this problem in the past versions(g3d).

Crysis 2:Yes,actually only z-buffer, but the problem is that it does not perform the injection, vorpx has a bug, and collects and sends information to Microsoft dialog automatically.

PD:Just to clarify:
I’m used to perform these steps usually for games that only support DX9 geometry. Apart administrator modes also check soil and other potential problems in case troubleshooting before reporting.
In this case, almost certainly I think there is a problem with the latest version vorpx.
Cheers

[Ralf]

Crysis 1 has to be run in DX9 mode for Geometry 3D like indicated in the vorpX start message and the Game Optimizer. You have to add “-dx9” (without the quotes) to the start options in Steam, DX10 is Z3D only. For Crysis 2 please try to change between the different DirectX version that the game offers. Can’t remember ATM, but not unlikely that only one of them works, the game is Z3D only.

[Grumdark]

I bought and downloaded crysis 2 version steam, to play it with vorpx, after seeing that is in the list of supported games, however, the game does not work at all for me.Any help with this?

On the other hand crysis 1 (steam version)has broken my reconstruction 3D geometry in this latest Vorpx version, with important graphical quite a while problems with several games from the list of supported vorpx.
Any idea how to fix this?