Forum Replies Created
-
AuthorPosts
-
RalfKeymasterGreat video. Thanks for posting (and doing) it. I’ll try to check the Reddit thread tomorrow and answer questions there, for now I have to call it a day.
RalfKeymasterA few posts above is a list of the current games with positional Direct VR. vorpX never was advertised as providing roomscale in any way. I’m in fact very, very conservative in this regard on purpose. Even in yesterdays announcement it says is that Direct VR can handle positon in SOME games, with no mention of roomscale anywhere. As much as we all would like that, there is no magical formula to transform every existing game in the world into a roomscale game unfortunately while not even most native VR tiles are actually roomscale games.
You can perfectly well play standing, walking in place etc. with every game that has Geometry 3D (and thus positional tracking). In some games more may be possible, but the above is the common denominator that you should have in mind in general.
RalfKeymaster@ prinyo:
Only some super generic hint, sorry: if you didn’t do so already, try restarting SteamVR/Oculus Home or the PC.
@ rust, hhhqwe:
That is done with a reason: if you wander off too far, rotation may not be correctly centered anymore. I totally understand that you would like to have any game converted into a perfect roomscale experience, but if at all that is only possible to a certain degree with games that have positional Direct VR, where this restriction does not exist.
And depending on the game not even that necessarily works well since for example games may use different position values for collision detection and rendering which may make you run against an invisible wall for example while you see an open door in front of you. That is all a lot more complex than you may think and there are certain limitations re what should be done.
RalfKeymasterTechnically that is possible to a degree, but it causes so many small yet odd glitches and issues in regard to the roatation axis not being centered anymore when doing this that there is no setting for something like that (and never will be).
If you really want to do it for some reason, there is a way though: move your head in the exact opposite position of the desired off-center position and re-center the head tracking with [ALT][SPACE]. Ah, and you didn’t hear that from me. ;)
RalfKeymasterYou may have to release other buttons first before the shift mapping is actually active. Implementing two different mappings on a device is a surprisingly complex matter if you want to avoid unwanted key presses during the shift change, but at the same some dual key presses actually are wanted.
If you want to use a real gamepad, switching the Touch controllers to Keyboard/Mouse in the vorpX menu will do the trick.
A word of advice if I may: invest an hour to get used to the keyboard/mouse Touch mode. More time than you would believe went into figuring that out, trying all sorts of things until it was finalized. It works fairly well after getting used to it. All things considered better than Touch as gamepad for my taste and definitely a lot more fun than having your hands fixed in front of you by using a gamepad.
RalfKeymasterThe grip triggers on Touch and side buttons on Vive are reserved for vorpX functions in both gamepad and mouse/keyboard mode. Customizability is a good thing unless taken too far, but this is necessary to have some consistency between all profiles and devices. There is no way to convince me of the opposite in this specific case. ;)
Bumpers are mapped to SHIFT (left grip) + the according left/right trigger in gamepad mode on Touch.
RalfKeymasterAre you using an AMD or an nVidia GPU? On nVidia shadows should always have been perfectly fine unless you force Ambient Occlusion in the graphics driver control panel or use some mod organizing program that uses it’s own ini files instead of the default Skyrim ini files. On AMD there supposedly is an odd shadow issue in some cases, but the circumstances are unclear since it can’t it be replicated here for some reason.
Memory scanning always poses a certain risk in regard to occasional crashes unfortunately, hence the warning in this regard on the scan progress screen. Although I can’t say that I have experienced that very often in Skyrim or the Special Edition. Unfortunately such things are extremely hard to diagnose since very system dependent. So all I can recommend is some very generic stuff like trying to reboot, not overclock and things like that.
RalfKeymasterI assume your are using a Vive? That is done by design. The Vive has a fairly high vertical FOV, so for the sake of better image quality (higher pixel density) the vertical FOV is not fully used on Vive. Instead it uses the same vert FOV as Rift, while the horizontal FOV is used fully.
I wouldn’t really recommend that for the image quality reasons outlined above, but if you are severely bothered by the bars, you can use the “Image Zoom” option on the image page of the vorpX ingame menu to fill the screen fully. Moving the “Image Zoom” slider to its rightmost position fills the vertical FOV fully on Vive.
IMPORTANT: If that option isn’t visible, please wait an hour or two until we have a hotfix ready that fixes some missing menu entries on Vive.
RalfKeymasterYou can recenter manually either through a button in the menu (as soon as it is visible again) or with [ALT][SPACE], which can also be changed to any other key in the config and mapped to the Vive wands if needed.
RalfKeymaster@ Dedalus
Off the top of my head: The Bioshock games and the Fallout games and Aliens Colonial Marines. All games with Geometry 3D have positional tracking without Direct VR though. If not active per default, it can be enabled on the head tracking page of the ingame menu. Note that neither Direct VR nor the normal pos tracking auto-convert games into great roomscale experiences, it’s perfectly fine for playing seated or standing with a little bit of movement though.
@ prinyo
The menu issue was just identified thanks to the logfiles rust sent. It actually affects every Vive owner, so it will be addressed immediately. With Vive these options are invisible due to a last minute change yesterday that wasn’t tested anymore with Vive.
I will issue a hotfix shortly (within the next few hours). Once it is online vorpX should auto update again.
If you still need/want a new download, you can get that at any time from the link below:
http://www.vorpx.com/request-new-download/Jan 1, 2017 at 8:10pm in reply to: VorpX 17.1 render different shadows in every eye Alien Isolation #124099
RalfKeymasterThanks to the logfiles you sent the issue could be located. A hotfix will be made available within the next few hours after a few short tests. As soon as it’s online, vorpX should auto update when you start it. if that fails, just try a reinstall later today.
RalfKeymasterNo, sorry. vorpX does not work with PSVR . I won’t rule it out for all time, but right now that’s the state of things.
Jan 1, 2017 at 6:59pm in reply to: VorpX 17.1 render different shadows in every eye Alien Isolation #124094
RalfKeymasterDid you read my answer to that question in your other thread?
That is not supposed to be that way. There seems to be something wrong with the menu, but I don’t have any idea what that might be.
Please first try a reinstall. If that does not help, please create a trouble shoot data archive in the config app after running the game and send that to support |at| vorpx com.
I will have to look at a logfile before I can even make a guess what the issue may be. If you send that data, please allow some time for an answer. It probably won’t be possible to check it today.
RalfKeymasterSorry for needing a little bit of time to get back to you, it’s Sunday here too.
The request code is shown in the dialog that appears when you start vorpX after installing it.
Jan 1, 2017 at 6:48pm in reply to: VorpX 17.1 render different shadows in every eye Alien Isolation #124088
RalfKeymasterIf the option to disable the shadows that I spoke of above is not available in that game, switch to Z-Buffer 3D if the wrong shadow bothers you too much to play. Z-Buffer 3D by design does never have such issues.
-
AuthorPosts
