Forum Replies Created
-
AuthorPosts
-
Nov 18, 2016 at 10:20pm in reply to: Option to switch off 'view recentering' when in edge view mode #122938
RalfKeymasterI will think about a way to achieve the intended behaviour without affecting your use case, which clearly will become more popular with Vive controller/Touch support. I just can’t promise anything since both have to work together. You wouldn’t want to use EdgePeek without the current functionality.
Nov 18, 2016 at 9:53pm in reply to: Option to switch off 'view recentering' when in edge view mode #122936
RalfKeymasterOK, now I got it. I have to look into that. What you describe is actually intended behaviour, but I see that it can cause a problem when playing without a defined forward position. The reason for this behaviour is that otherwise you may end up looking into the wrong direction after exiting EdgePeek if you look around a lot while EdgePeek is enabled.
I will think about a way to achieve that without affecting your use case, but I can’t promise anything.
RalfKeymasterThat sounds like a typical issue with SteamVR when the GPU is heavily used. this is the main reason for Fluid Sync being enabled per default. If your Pimax headset does not support reprojection that will lead to the 30fps cap you descibed earlier though.
I would suggest to lower the ingame resolution/detail settings or switch to Z-Buffer 3D to reduce the GPU workload if a game shows these symptoms.
User settings are stored in a database, they are not accessible with a text editor.
The ingame menu can be accessed with DEL per default, not ESC. You can change the key assignment in the config app.
Windows Defender shouldn’t cause any issue BTW. If it does for some reason on youe machine, I would suggest to exclude the vorpX program folder from scanning instead of disabling it completely.
Nov 18, 2016 at 9:43pm in reply to: External speakers always set to default upon launch resulting in crash #122934
RalfKeymastervorpX per default automatically switches to Rift/Vive audio when you start a game and back to your default device afterwards. If the audio switching causes issues for you, you can disable it in the config app and instead switch devices manually as required.
RalfKeymasterTurning off head tracking cannot have any effect on the Oculus software being able to recognize the sensor, but please do still not use it since that can cause the image to be displayed upside down currently.
Instead please set the sensitivity to 0.0 if you want to disable head tracking for some reason.
RalfKeymasterThe left stick is configured to simulate WASD keys when using the controller emulation.
You can change button mappings on the gampad page of the ingame menu. To do that press the “Button Mappings” button, which will extend the page and show the according options.
There will be no dedicated new features regarding the gamepad emulation, but the new Direct VR feature will allow native gamepad use for more games that do not allow mouse and gamepad to be used together. This won’t apply to all those games though, only to those with Direct VR support.
The easiest general way to deal with games that do not allow mouse and gamepad to be used together besides using the gamepad emulation is playing the game in question with mouse and keyboard.
If you want to use an external tool like joy2key, you may have to disable the gamepad in the game’s options menu.
RalfKeymasterTry to disable “Fluid Sync” on the display page of the vorpX ingame menu. For the HTC Vive vorpX per default uses the interleaeved reprojection feature of SteamVR, which creates additional frames in between the normal game frames.
If your headset does not provide this functionality, you may have to disable “Fluid Sync”, which also disables the Vive’s reprojection feature.
Nov 17, 2016 at 6:15pm in reply to: Option to switch off 'view recentering' when in edge view mode #122896
RalfKeymasterI’m not quite sure why you would want to use EdgePeek mode for playing standing. EdgePeek is meant for using menus or looking at HUD elements in corners, not being bound to the view direction is actually the main characteristic and purpose of EdgePeek mode.
Unless I totally misunderstand what you are trying to achieve, you can easily play standing in normal Full VR mode. If you recenter the view while standing, you can look arround using head tracking and use the gamepad to move, which to my understanding is what you would like to do.
vorpX has a built in gamepad emulation BTW., so joy2key isn’t strictly required. An external tool does the job too, of course.
RalfKeymasterLooking around is pretty much the nature of the Full VR mode, so there is no such option.
There is a way to get a immersive view similar to Full VR with locked tracking in cinema mode though. If you switch to the “None” or “Ambience” scene and then move the screen very close to you, the image (almost) fills the whole view, but you are still able to look around the screen. That should come close to what you had in mind.
RalfKeymasterIf you want to disable head tracking, please set the sensitivity to 0.0 on the head tracking page of the ingame menu. There also is enable/disable switch, but that’s borked currently. Do not use it, may lead to one eye showing upside down.
Game profiles can’t be edited in a text editor since they are stored in a database. All relevant user settings can be changed in the ingame menu and are then stored in the database.
If the question is related to settings not being saved, please make sure you have the latest hotfix 16.2.1 from two days ago installed. In the last version there was a stupid glitch that could lead to the database not getting flushed to disk.
RalfKeymasterDepends VERY much on your GPU and your ingame detail settings and resolution used. Try games that are few years old (and aren’t notorious resource hogs like Skyrim). The original Bischock 1+2, Half-Life 2, Portal 2 for example.
I am aware that you probably don’t want to hear that, but for more demanding games use Z3D! It can’t be said often enough how much more important a smooth frame rate is compared to perfect Stereo 3D. Your brain gets used to that quickly. There are 18 visual cues that your brain can derive depth from, only three of them depend on stereo 3d (https://en.wikipedia.org/wiki/Depth_perception).
RalfKeymasterNothing beats true and steady 90fps. With vorpX that means 90/90. The most relevant value is the first (Game FPS), that is the actual game frame rate.
RalfKeymasterThat is Spacewarp in action. It automatically activates itself whenever it believes the GPU is too busy to maintain 90fps. Whenever that happens, (direct mode) fps is capped to half the display refresh rate by the Oculus runtime. The intermediate frame is then created in the runtime itself. With vopX’s two thread architecture that seems to happen a bit more often than necessary, but overall it’s still a good thing. 45(game)/45(direct mode) with ASW can feel better than for example 60(game)/90(direct mode) without.
RalfKeymasterUnfortunately that can happen with some av programs with each new vorpX version. Quite annoying. Ideally please report the issue as false positive to your av vendor, so they can fix this. You can also let me know which av program you are using. Then I can report it to them.
BTW: My personal recommendation would be to use Windows Defender, which has become quite good over time and isn’t as overzealous as some of the others. There only was one issue with Windows Defender in over three years now.
RalfKeymasterThe most likely cause of something like this is a conflict with your virus scanner or other security software. Please try to disable/uninstall it and see whether that helps.
If it does, exclude the vorpX program folder (usually C:\Program Files (x86)\Animation Labs\vorpX) from scanning. Most av scanners allow to exclude directories.
-
AuthorPosts
