Forum Replies Created
-
Posts
-
The start room will stay like it is: going through the tutorial on first launch, one click exit afterwards. Extremely unlikely that I promised anything else anywhere.
Suggestions are always welcome, but saying I’ll consider a suggestion is not a promise to implement it 1:1. To prevent misconceptions as much as possible I actually explicitely add a ‘no promises’ disclaimer on such occasions. Should I really have forgotten that when you made your suggestion (unlikely but not impossible, of course): sorry for the confusion.
That’s a false positive. Either contact your AV vendor so that they can fix their false detection or – better – get of rid of invasive third party AV software altogether. Windows Defender is more than good enough since almost a decade. Not entirely without problems either, but at leat MS is usually fast addressing false positives if they happen.
Both so to speak. :) The current beta cycle will end with this release.
You’ll get an auto update to the new version regardless whether you currently use the beta or the regular build.
2023/12/21
A new update is available. Adds compatibility with Cyberpunk 2077 2.1. Including a fix for the rendering glitches when entering a vehicle.
Sorry for the confusion. The last profile database update for the beta accidentally included my work profile for the game without the current beta itself having any of the game specific code to make it work fully.
The game specific code will be in the next vorpX release. Expect that later today or (more likely) tomorrow. No working scanner unfortunately, Bethesda changed the way the camera works. Not a super huge deal though, tracking latency is fairly low with default tracking too.
No more fumbling with FOV etc with the next vorpX build. That will be done automatically.
Only Portal 2 is supported of these three. That should work without any hassle though. if your new PC has Windows 11, make sure to use the vorpX beta from the link below. There is a severe petformance issue with DirectX 9 games like Portal 2 on Windows 11 with the regular vorpX build.
Even if your PC is brand new, please double and triple check for any tools in the background that may hook into games. Some bigger PC vendors preinstall bloatware that may interfere. Also remove any potentially preinstalled invasive third party antivirus. Use the built in Windows Defender instead. Defender kicks in automatically when you remove third party AV.
For the vorpX beta check this thread:
Just a heads-up that a fix for the vehicle issue will be available shortly.
Either the 2.1 update itself or the according CET update breaks detecting the current vehicle type (car or bike). The mod uses this information for optimizing the camera position since the unmodified flat camera positions don’t really work well in VR.
The failed vehicle type detection then causes a bunch of other issues which in the end lead to the heavy rendering glitches you see.
Long story short: I have to figure out another way to distinguish between cars and bikes. Once that is done everything should work as expected again. Expect a fix within the next two or three days.
The reticle in FullVR mode is never too high, that’s an – albeit understandable – illusion. The reticle is always at the optical center, *BUT* all VR headsets have a neat little optimization to maximize the amount of pixels used where it counts:
The VR camera matrix is vertically asymmetrical, i.e. more pixels are rendered below the eye position than above. That accommodates human vision, which focuses more on things below our eyes than above. Some headsets do that to a greater extent than others, but all do it to a degree.
Since normal games don’t have such an asymmetrical camera but the headset does, depending on vorpX’s ImageZoom setting the screen of your headset may be fully utilized above the eye position, but not below. In other words: while the reticle might not be centered on the screen, it’s in fact still at the center of the camera.
Unless ImageZoom is capped because a game is known to only work with a certain FOV range, you can raise the ImageZoom value to the max to fully utilize the sceen. That comes at a price though: higher ImageZoom means lower pixel density and requires a higher FOV, which costs performance. Defaults are carefully chosen, so better don’t touch these things unless you fully understood the above. Take this hint seriously please.
Confused? Understandable. Still 100% what is happening. Everything working as it should – and has to.
CAVEAT: No rule without exception. In G3D games things may get a bit out of sync if you use vorpX’s camera height modifier. You’d have to actively do that though. So unless you changed the camera height in a G3D game you don’t have to worry about this exception from the rule.
vorpX is actually supposed to rename the SteamVR desktop theater .exe automatically since SteamVR exists. It even checks every few seconds while running to not miss any potential changes at any time. When exiting vorpX the .exe name gets restored. One of the many little quality of life things vorpX does usually unnoticed.
If that doesn’t work for you, try to launch SteamVR before vorpX. That way vorpX can be sure where to find the desktop theater, without SteamVR running it has to guess. Usually that guess works well too, but it might not be 100% reliable under all imaginable circumstances.
Might just have been coincidence. Depending on which app hooks first a hooking conflict can sometimes cause no issue at all and the next time crash a game entirely.
I don’t see any super obvious trouble maker in your process list, but the HP overlay is something you might to want to check. If that is some kind of game overlay, it’s definitely a high level candidate. Same for the HP System Optimizer. Stuff like that may occasionally be more than useless bloatware, but it comes with a high potential for hooking conflicts.
Not sure if I recommended that earlier already, but since your PC is a laptop, also try to disable the internal GPU entirely in the BIOS if possible. If a game launches on the iGPU while the headset is connected to discrete GPU, things won’t work at all.
…I think you misunderstood. He’s just asking about playing a Steam game without loading Steam VR…
If that was indeed the question:
SteamVR is not supposed to run at all when using a Quest with Link. Make sure that vorpX is set to Oculus mode in the config app. Do not launch SteamVR, it not required and should not be running. SteamVR is only supposed to be used with native SteamVR headsets (e.g. Valve Index).
vorpX is actually supposed to rename the SteamVR desktop theater .exe automatically since SteamVR exists. It even checks every few seconds while running to not miss any potential changes at any time. When exiting vorpX the .exe name gets restored. One of the many little quality of life things vorpX does usually unnoticed.
If that doesn’t work for you, try to launch SteamVR before vorpX. That way vorpX can be sure where to find the desktop theater, without SteamVR running it has to guess. Usually that guess works well too, but it might not be 100% reliable under all imaginable circumstances.