Search Results for 'ArmA 3'

[megawaly]

OK, I did a bit more digging and it seems to be in the hands of BATTLEYE.
I found some comments on a youtube video (HERE):

“It appears that ARMA 3 game update 1.46 (enhanced battle eye protection) has broken Vorpx ability to engage. With Battle eye off Vorpx 0.8.10 is fully able to engage and display as per the above video routine. Email has been sent to vorpx and also battle eye, I will update once I know more, my installation was fully working online with battle eye on before the 1.46 update, and again with battle eye off it works fine, on it does not work, to me that means the battle eye is the issue.”

“In short Battle Eye cant allow Vorpx to access the Dirrect X files. There was a lot of back and forth about it, ben from road to vr was looped in on the emails and also given a cliff notes, I asked him to chase both sides to find out the inside scoop as there will be a lot of Arma 3 Dk2 players that are going to be devastated about this.”

These comments are from about 2 weeks ago. Does anyone have an update as of yet? Ralf, if you read this, do you know of any status?

[WolkerBo]

Same problem, I’ve checked the process excluded from start of vorpx and i’ve removed Steam and luncher, but no way, still not work.

If i start Arma3.exe directly it work well but it’s impossible to play online (so the 99% of the game).

For me the problem is in some exclusion, but for the moment i can’t found it

Edit : For me have more sense to add the program I WANT start with vorpx, not the contrary….

[megawaly]

Hi,
I can get the rift working great with ARMA3 when i run the arma3.exe directly. but not if I use the launcher/Steam. I have figured out the problem is when ARMA3 is run with BATTLEYE.

So for instance if I run arma3.exe and want to play multiplayer, the message will show “battleye not enabled, click to restart arma with battleye” and when I do this, it is no longer on the rift.

Has anyone been able to work ARMA3 with battleye running?

Thanks.

[dtg8]

I have tried re-installing and that didn’t work. I thought it might be ARMA 3 causing it to exit due to the new update but that isn’t the case. I tried running it just by itself and it seems to be disabling itself. Any thoughts on what it might be?

[MarcoZ]

So i bought VorpX today and got it running, and it hooks fine on both monitors on every game – i tried with ARMA 2, 2:OA, 3, Outlast and GTA V, however instead of seeing an image i only see a very slight opening which is the extreme left of the left eye and the extreme right of the right eye, resulting in a small square of graphics at the center of the screen if i’m looking through a monitor, or a very very small line of picture on the Rift if you go crosseyed. I tweaked the options, and going for a smaller IPD and smaller scaling got me to see more of the image, but still no more than 1/10th of what i’m supposed to, while i get a completely black screen for 1x scaling and an IPD of more than 64mm, the same happens on my oculus profile. As a side note, the head tracking seems to go completely crazy on the mouse and the little of the picture i see is constantly spinning, unless i disable head tracking. Anyone had this problem? I tried wiping and reinstalling, having the tracker plugged and unplugged, disabled the steam overlay, but to no avail. As far as graphics goes, i have an AMD R9 280x. Anyone ever have this same problem? I’m not sure what to do.

[digitalx]

Also, arma 3 and payday 2 work. It’s only GTA V that does not.

http://i.imgur.com/Vbb8d1n.jpg anything look out of the ordinary? i’ve remove the sweetfx folder and a sweetfx file, but i cant remember how the standard folder is meant to look like. bumping because im about done at the moment trying to solve this. Normally a patient man.

[ep1cminer]

I have searched for a while now. (About 2 days) No one that i have found has the exact problem. They start out but end wtih that their mouse is stuck or something.

Mine is that i cant click on things. Everything else is fine. I can run Arma 3 (As exampel) in “show on desktop” through VorpX but when i launch it throught the oculus i cant click on things with the cursor. Dont know if its the resoulutinon that is fakeing the buttons but if i press outside it will tab me out of the game. So it cant be that.

The only thing i can do while in a game is press the left or right keys and most games doesnt work great with that.

English is not my native langued sorry for any misspellings

[DarrellM]

arma 3

[Stu]

I apologize first off if this post is in the wrong forum but I am new to the forum stuff.

First off I would like to say this program is fantastic. PC for dummies somewhat confuses me but so far this program has been fairly user friendly.

Set my dk2 up for arma3 but have a few issues I am contending with.

1. get in the game and its on my oculus but my mouse seems to be controlled by the head tracking even outside the game.

2. I use the edgelook which I have become a big fan of but the cursor I am getting is only for the vorpx stuff and it won’t let me click on play.

I know the problem is the piece of meat sitting in front of the computer but if there is anyone that can give me an idea as to what to do I would greatly appreciate the helping hand.

[Bo0G]

I see a lot of folks here getting good 3D results even on unsupported titles by renaming the unsupported game title executable to a supported title like DXHRDC.exe, Arma3.exe, or UDK.exe. Dying Light is one such game (I know it has native support, but I would prefer to play it with vorpX for easier menu navigation)

I have Dying Light on Steam. When I rename the DyingLightGame.exe to DXHRDC.exe and then launch it from a Windows Explorer window, it automatically loads Steam and then Steam says it can’t find the executable.

Is there some setting or work-around for using this renaming hack with Steam titles?

Thanks in advance for any assistance!

[6093135869]

Hey, the only thing i got working with vorpx so far is ARMA 3 (and the image is too zoomed in for some reason) All the other games i have tried like skyrim, fallout NV, red orchestra 2, dont seem to activate vorpx. When the game starts i cant get the menu to come up by pressing delete. im using the rift DK2 in extended mode and launching them through steam while the DK2 is set to primary display, also the i set up the vorpx config to the same as the Dk2 guide PLEASE HELP Does anyone have these games working on a optimus laptop?

Alienware 14
GeForce GTX 765m
Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz
8.00 GB RAM
Windows 7

[Karlor]

I posted this under unsupported games that still have 3d:
I got Dying Light to run with geometry 3D by changing the name to DXHRDC. The built in “beta” rift support was cool and all but worked only sort of good. Now you can adjust all the goodies vorpx lets you and now its in READABLE text thanks to vorpx. If you guys haven’t got this program yet and you have and play games on your DK2 this is a must have. WORTH EVERY PENNY. Any way yeah i messed with the vignette scale and image zoom and some other stuff but it works great. Tried UDK and it hooked but no geo and I used arma 2 but no luck. But DXHRDC works great. There mite be another that hooks even better but for now I’m going with DXHRDC. Oh and DO NOT HAVE THE DEFAULT RIFT SUPPORT AND TRY TO RUN WITH VORPX it will give double screen effect. Disable factory rift support if you have added it then hook with vorpx.

Note:
I use z-adaptive usually though, its just seems to be easier for my eyes. I suggest trying out different combos of increasing vignette scale and decreasing image zoom as well as the reverse of decreasing vignette scale and increasing image zoom until it feels right. I also turn down head tracking to around 60% and in the game settings i set the mouse to about half to a little less then half.

Controller support:
If you want to use a game pad ( I usually do) Go into vorpex settings in game (Del) then go to handle game-pad internally, you want it to be yes but if its yes when you start up the controller wont work. So each time you start the game go into vorpx (del) and flick it from on to off then back on and the controller will work. There are some things that get weird with controller support right now like this but hey it works.

[rift_un]

Is there a support / ticket based system that us vorpx users can use?

Im generally pleased with vorpx, works with arma (tridef did not). FSX headtracking with vorpx probably does work if the correct key is pressed in game. I think some problems might be due to not knowing the actual game i’m playing ie it’s keys etc.

It’s definitely worth getting familiar with a game before trying to play it with these 3d drivers like vorpx.

FSX, for me, is better with tridef at the moment.

[rift_un]

Try:

-open steam but don’t attempt to run the game from steam

-instead, browse to the folder where the game exe file is on your hard disk

-try starting the game from there

-if it fails, try 2 or 3 times

Works for me with arma 2 and 3 (steam games)

[dstackm]

Karlor wrote:

Howdy,
Add another one! I got Dying Light to run with geometry 3D by changing the name to DXHRDC. The built in “beta” rift support was cool and all but worked only sort of good. Now you can adjust all the goodies vorpx lets you and now its in READABLE text thanks to vorpx. If you guys haven’t got this program yet and you have and play games on your DK2 this is a must have. WORTH EVERY PENNY. Any way yeah i messed with the vignette scale and image zoom and some other stuff but it works great. Tried UDK and it hooked but no geo and I used arma 2 but no luck. But DXHRDC works great. There mite be another that hooks even better but for now I’m going with DXHRDC. Oh and DO NOT HAVE THE DEFAULT RIFT SUPPORT AND TRY TO RUN WITH VORPX it will give double screen effect. Disable factory rift support if you have added it then hook with vorpx.

teach me exactly how to do this tried renaming it to that and steam wouldnt find the executable.