Forum Replies Created
-
AuthorPosts
-
RalfKeymasterThe solutions above and in the dedicated GTA thread are the solutions for GTA V Full VR since 1.5 years. As much as I’d like to offer another special one just for you, these four options are the ones that are available.
The mod I linked may not be the one you are talking about. The one linked in the post above to my knowledge requires vorpX.
Mind that the game uses Z-Buffer 3D. Compared to Geometry 3D that means “less 3D” for foreground objects (not so in the distance though), on the other hand it’s twice as fast. If you don’t see any 3D-effect at all, try ALT-TAB out of the game and back. With a (very) old GTA V version there was an issue where sometimes the Z-Buffer could not be found before doing that. That doesn’t happen since over a year, but maybe for whatever reason it still does with your individual setup.
Below is a screenshot with the settings for Flawless Widescreen, which I just confirmed to be working with the latest GTA V version, just in case.

This is for Vive, GTA V resolution 1600×1200. All vorpX settings at their default values. FOV for Rift would a bit lower. The important ones are first person and vehicle FOV. The other ones can be set to your liking.
If FW doesn’t work for you, check whether you maybe have some security software installed that may prevent it from applying the FOV fix. Also make sure that your GTA is updated to the latest version (and that you are not using an “unofficial” version of the game). Memory fixes like the one Flawless Widescreen applies may be version dependent.
RalfKeymasterHere are again all options you have in regard to dealing with FOV in GTA V compiled in a single list for your convenience. You can enhance the 3D effect by adjusting the “3D Strength/Separation” parameter in the vorpX ingame menu (main page).
- Use the vorpX Image Zoom in the ingame menu (image page). This is a non-perfect solution since it introduces top/bottom bars, on the other hand it’s very easy.
- Use Flawless Widescreen to adjust the FOV: http://www.flawlesswidescreen.org
- Try this FOV mod from a Reddit user (not sure whether that still works with the latest GTA V version.
- If you have an HTC Vive, try this mod that uses vorpX for 3D and does head tracking/FOV inside the mod. Might also work with Rift if you install SteamVR and set vorpX to “HTC Vive”.
RalfKeymasterYou made that purchase with an enitirely different mail address (yahoo.com) than the one you posted above, hence the system could not link your key request to your purchase.
The receipt helped with that, so it’s sorted out now. I will link your G-Mail address that you used to send the key request to the prchase and you will receive your key shortly.
Let me know if it doesn’t reach you wthin an hour.
RalfKeymasterUnfortunately there is neither a completed nor a failed purchase with that mail address in the database of our payment service MyCommerce. Are you sure that this was the mail address that you entered into the purchase form?
If it was, you almost certainly were not charged since there is no record of a purchase with that mail address. If against the odds you were charged (you can verify that in your PayPal/credit card account), please send your PayPal receipt or a screenshot of the credit card charge to support |at| vorpx com and we will forward the matter to MyCommerce for clarification.
RalfKeymasterPlease post your MyCommerce Order-ID or the e-mail address you used for purchasing vorpX. The mail address you used to register here is not in our database unfortunately, so I can’t check what’s going on. Thanks.
RalfKeymasterAs said yesterday and mentioned in the e-mail you received, you need to use an external program to adjust the FOV in GTA V like described in this GTA V thread. There isn’t any other answer to your question than the one you already got twice, sorry.
To enhance the FOV in GTA V you either need the FOV mod or Flawless Widescreen that are both linked in the thread.
If you can’t or don’t want to use an external program, the only way to deal with FOV in GTA V is using the vorpX Image Zoom as a non-perfect workaround to compensate for the missing FOV like described in the “1-2-3 Game Setup” in the vorpX help.
Please do not open multiple topics with the same issue, all that does is making the forum unreadable. Thanks. Your other posts with the same question will be removed.
RalfKeymasterWhere did you get that from? You can play it right now in 3D following the instructions by bakayoyo above. The next vorpX version also will come with a pre-made profile, which has some advantages over the method described above.
RalfKeymasterThis is indeed a false positive.
vorpX “injects” other programs which some av programs may classify as malicious behaviour without really being sure about it. Unfortunately that can happen for each new version with some overzealous av programs.
The easisest way to prevent that entirely is excluding the vorpX program folder from scanning (usually C:\Program Files (x86)\Animation Labs\vorpX). Most av programs allow to exclude folders from scanning.
RalfKeymasterNot really a good idea to run games through a desktop capture app for various reasons. Neither with the one vorpX provides nor with any other. Directly hooking into a game always is the better way. A native profile will be added with the next vorpX version.
BTW: The next vorpX version will add VR-surround-video (120°-360°) support with MPC-HC, VLC and the vorpX desktop viewer and also support for custom environments in cinema mode. For most users the usefulness of an extra desktop app will be *very* limited from that point on.
RalfKeymasterJust in case you didn’t do that already: you need to import this profile for Skyrim Special Edition. It’s not in the default database yet.
RalfKeymasterSome of these helper programs like Mod Organizer do very odd things (write protecting .ini files, changing DLL search paths etc.). Please do not use them to avoid potential issues. SKSE alone shouldn’t be a problem, but since it also hooks into the game similar to vorpX there’s always a chance that it breaks things with some mod.
If you use mods and experience problems, remove all of them and add them back one by one to check which mod may cause an issue.
RalfKeymasterA full install will probably help.
You can use the web installer that you received when you purchased vorpX for that. It will download the latest version available. If you don’t have the web installer anymore, you can get a new one here.
RalfKeymasterYou need the config app to import profiles into the database, there is no way to do that manually.
I don’t really have anything else than general suggestions in regard to your issue with the config app, sorry. Double and triple check for issues with your DotNet config, virus scanner or other security software. Also try reinstalling vorpX if you didn’t do that already and try the Microsoft Dot Net Repair Tool.
If this is mainly about being able to play Skyrim I can safely recommend to use the original Skyrim version if you can’t import the profile. It actually runs a bit better than Skyrim SE with vorpX on most systems and the profile is already available in the database per default.
RalfKeymasterWhen ‘Asynchronous Spacewarp’ kicks in, the Oculus runtime always caps the actual frame rate to 45fps and then produces one intermediate frame for each real frame based on motion estimation. The basic principle is the same as the frame interpolation you may know from your TV – including the rather similar visual glitches and hiccups it sometimes can produce.
There isn’t much of a difference between ASW and No-ASW for rotation since rotation already was/is covered by ‘Timewarp’ in a seemingly similar (albeit technically very different) manner. As you noticed ‘Spacewarp’ now does something with a similar effect for positional tracking. Nothing more, nothing less.
If a game runs at true 90fps, ‘Spacewarp’ is never active. The Oculus runtime dynamically decides to enable/disable it based on GPU workload.
RalfKeymastervorpX shows a tray icon in the taskbar (left to the clock). If it’s not visible, click the small arrow in the tray icon area to open the small window with hidden tray icons. You can exit vorpX from its tray icon’s right click menu.
For 3D in Skyrim SE you need this profile. Make sure to follow the instructions!
In regard to Far Cry 4 please make sure to disable the ingame overlay in the Uplay options. Also go offline in Uplay, the game will crash otherwise after connecting to the Ubisoft server with vorpX.
-
AuthorPosts
