-
Search Results
-
In reply to: Cyberpunk VR Update Thread
Unfortunately the method comes with inherent issues that have nothing to do with „when done properly“. If you guys consider that good enough, I‘ll follow, but you should be aware that AFR 3D is more of a stopgap than anything else. Some of the problems that arise from rendering each eye at a different point in time can be tricked away under certain conditions, others can‘t. If this really was a good way to do 3D, everyone would do it all the time just because it’s so much easier.
In reply to: Can’t get Bioshock infinite working
Sounds as if the profile for the game hasn’t been loaded correctly. Two possible reasons: either the profile database is corrupt or maybe vorpX can’t detect the game because its .exe is named differently than normally.
You can check whether vorpX was able to detect the game correctly in the config app. Since it is supposed to adjust some settings in case of Bioshock Infinite, there should be an entry for the game on the ‘Restore Game Settings’ page.
If not:
First please try a factory reset in the config app (trouble shooting). That would fix a potentially broken database.
In regard to the second option, please browse to the game’s install folder and check wehether the .exe is named BioShockInfinite.exe, it’s located in [Bioshock Infinite]\Binaries\Win32. Sometimes games use different .exe names for different editions. If that happens to be the case, it would great if you let me know so that I could update the profile.
In reply to: Cyberpunk VR Update Thread
After some more playing-around I was able to get 1.31 to look as good at 1.23, and was able to transition and really dig into this.
I have to say, the results are very good most of the time. There are random times when you’ll get extremely obvious artifacts, which I now understand are due to TAA. It’s a real shame that even with direct VR we have to have these artifacts, because it’s really the only thing getting in the way at this point.
A quick tip for Pimax users (at least, my 8K-X, but I suspect other Pimax HMDs should behave the same way): In playing around I discovered that *by far* the smoothest and best performing HMD-sync parameters were: Custom: Sync = Fast, Frame Rate Limit = Yes -> Small Delay or OFF (but you’ll have to reset it every time if you choose OFF). HMD Multithreading = ON. Just the HMD Multithreading alone nets me 15fps. I’m running my HMD at 75hz in this case. I get very smooth overall performance that varies between approx. 50 and 75fps, but with zero stuttering or other issues.
In reply to: Cyberpunk WMR Controller Mapping
I do understand the technical hurdles–I used to be a 3D engine developer back in the aughts (C++/OpenGL, started when there were no shaders at all, then worked with the horrible ARB_fragment_program extension, then GLSL, etc.), and like I said, I certainly appreciate your work & support. I just never cut you any slack because, hey, Vorpx costs 40 bucks :) And something that works well in a car or a plane game isn’t necessarily the brightest idea for a walking person simulator, regardless of how big of a technical achievement it represents.
I think you would be in a much better position if you made it clear:
–what this VR mod is and isn’t;
–more importantly, how it’s different from vanilla Vorpx.As it stands now, if I were someone who’d never tried Vorpx before and installed the mod, I would play it for 5 minutes, uninstall the cr*p out of it, and never touch anything Vorpx again. If you clarify, however, that the mod is meant to be played sitting in a chair and turning around with a joystick, and that the VR aspect of it is that you can tilt your head slightly to the side–AND that vanilla Vorpx allows you to turn with your whole body–that would clear up a lot of confusion.
You could also market the mod as a disabled person simulator (not joking), but it could be interpreted as an affront by a lot of people.
In reply to: Cyberpunk VR Update Thread
I can’t aim with the stick to save my life, and aim assist has to be off to prevent horrible judder when moving while locked on to a target. Also I have the vertical sensitivity turned way down on my right stick so I don’t keep moving my view up and down when I’m trying to turn.
Good Idea about turning down the y sensitivity, I didn’t know you could do that. In Full VR there’s literally no reason to have to move the y axis when you should be looking around with your neck.
For me, anytime the camera isnt locked straight ahead its a one way trip to barf town. So I find myself very carefully trying to only move the view left and right.
I did find a solution potentially to the problem.
I hooked up a dual shock 5( 4 would also work)
using DS4Windows I set the DS5 to emulate a xbox controller. The default profile is mapped one to one with an xbox controller. I created a secondary profile called Vorpx and assigned it to the Cyberpunk2077.exe so that it loads automatically when the gane runs.
On the Vorox profile , I have unmapped the RY up and down axis so no more accidental vertical camera movement and I set the built in gyroscope set as a mouse which is only active when I push the Left trigger (L2)This allows me to aim with the gyro when aimimg down the sights which is far more accurate and intuitive than using the stick. ( It kind of feels like you are actually aimimg the gun with motion controls)
An alternative to this set up if you dont like gyro aimimg is.
under special actions tab add an action to L2 to trigger a temporary profile change to default which will switch back to the Vorox profile when you release the trigger. If you recall the Vorpx profile I unmapped the RY axis but when aiming down the sight this restores the RY mapping of the default profile.
To get the view straight again after aiming you can do it before you let go of aim. Or even better I have the touchpad in the center set up as a mouse trackpad so I can quickly adjust it with a swipe. This is very useful when the game decides to tilt your view to look at something.
@Ralf I know you have a vorpx option to disabke the Y in normal vorpx but I tried it and it doesn’t work.
Woukd it not be possibke to add an option under input settings to have a similar functionality as I described above since you’re emulating tje xbox controller anyway? Just dont map the RY axis unless you push a button of your choosing?
Obviously it would probably be impossible to do this with the gamepad because you probably aren’t emulating a real controllers xinput.
Edit: If the game you try this with actually supports the Direct Input controller you are using you can use the Ds4windows option to hide the original controller from windows.
In reply to: Future Best FPS: “Ready or Not” (Unreal Engine 4)
You have to try a lot of profiles before you find one that works, quick test I did a while back gave me one that worked in z3d but it wasnt all too good in terms of depth feel and biggest issue was weapons – in z3d they seem to be too close to camera and using ironsights was not comfy – full of “watery” artifacts. No, I cant say what profile Ive tried as I dont remember and I got rid of it because it wasnt working well for me (game didnt want to run well with good resolution either on ,y 1070)
Im just saying there are profiles out there that will work but you have to spend quite some time trying them all.
Thanks, I probe with several profiles (Conarium, The Turing Test, Get Even, Observer, etc) but none function with any 3D effect. Although I active the Z3D/G3D option I don’t see any 3D effect. I also have a 1070 and the FPS are good at 1920×1080.
In reply to: Future Best FPS: “Ready or Not” (Unreal Engine 4)
You have to try a lot of profiles before you find one that works, quick test I did a while back gave me one that worked in z3d but it wasnt all too good in terms of depth feel and biggest issue was weapons – in z3d they seem to be too close to camera and using ironsights was not comfy – full of “watery” artifacts. No, I cant say what profile Ive tried as I dont remember and I got rid of it because it wasnt working well for me (game didnt want to run well with good resolution either on ,y 1070)
Im just saying there are profiles out there that will work but you have to spend quite some time trying them all.
I just started using the Oculus Quest2 with VorpX via Virtual Desktop wifi streaming. Before I used the Vive and when I played VorpX games where I needed the Xbox One gamepad, I would just turn them off the Vive wands. No fuss.
Well the situation seems slightly more complicated with the Quest2.
Like before the Xbox One controlled works and it works like a normal xbox one controller ingame complete with vibration UNLESS I dare bump the Ouculus Touch controllers. Then the native xbox support goes away and instead my Xbox One controller falls back to some sort of crappy keyboard / mouse emulation mode.
I know this is happening because vibration function goes away, my mapping is wildly different, and controls are suddenly horrible and the game is unplayable.
Some things I did to troubleshoot:
1. I disabled gamepad emulation mode for the Touch Controllers in virtual desktop
2. I disabled touch controller functionality within VorpX
3. I disabled VorpX from using any of my xbox controller buttons.
4. Gamepad Controller “takeover” functionality in VorpX is set to “Off”.
Even with all of the above, as son as I move my touch controllers, my Xbox controller no longer has native access to Rocket League and has its controls rebound.
Any idea how I can fix this without having to pull batteries out? Is there a way to turn off the Oculus Touch controllers?
I am running VorpX 21.3.1 in SteamVR mode (I haven’t tried Oculus mode yet)
Topic: Cyberpunk VR Update Thread
This post will always contain the latest version infos and download link.
Latest version available here:
Download
Recent Changes
2025/09/12
A new update is available that adds support for Cyberpunk 2077 2.31 and updates the core components to match the latest vorpX version.
2025/08/23
A new update is available that fixes crashes when changing the display mode and some graphics settings in the game options, which were introduced by the earlier fix for the nVidia 580.88+ issue. Also addresses an annoying non-critical crash when exiting the game that could occur since a while.
2025/08/19
A new update is available that fixes a severe issue caused by nVidia drivers 580.88+.
If you experienced a black screen or crashes after updating your nVidia driver recently, please redownload the mod and reinstall it. That should fix the issue. As a side effect of the according changes the updated version may/should also run a bit smoother under high GPU load.
Older Changes
2025/07/20A new update is available that includes the Cyber Engine Tweaks modding framework for CP2077 2.3. No other changes.
2025/01/26
A new update is available that includes the Cyber Engine Tweaks modding framework for CP2077 2.21. No other changes
2024/12/11
A new update is available.
- Cyber Engine Tweaks modding framework updated for CP2077 2.2.
- HUD shaders fixed for CP2077 2.2.
- vorpX backend updated to latest version. Among general stability and performance improvenments this also finally fixes the ocassionally unavailable motion controller gestures after launching the game.
2024/09/15
A new update is available. Adds compatibility with Cyberpunk 2077 2.13.
2024/03/29
A new update is available. Adds compatibility with Cyberpunk 2077 2.12.
2023/12/21
A new update is available. Adds compatibility with Cyberpunk 2077 2.1.
2023/11/02
An updated version of alpha 9c for CP2077 2.02 is available. Fixes the broken HUD scaling in the last release.
2023/10/27
Version alpha 9c is available. Adds compatibility with Cyberpunk 2077 2.02.
2023/10/05
Version alpha 9b is available. Adds compatibility with Cyberpunk 2077 2.01.
2023/09/27
Version alpha 9a is available, mainly adds compatibility with Cyberpunk 2077 2.0.
2023/07/27
Version alpha 9 is available. This update mainly adds compatibility with Cyberpunk 2077 1.63. In addition to that an issue caused by newer nVidia drivers has been fixed that could lead to automatic game settings changes not being applied.
2022/11/10
Version alpha 8 is available. This update adds compatibility with Cyberpunk 2077 1.61.
2022/09/27
Version alpha 7 is now available. This update adds compatibility with Cyberpunk 2077 1.6 and contains some smaller fixes and improvements.
2022/03/08
A new build with the below changes is available for download.
- Cyber Engine Tweaks modding framework updated to latest version.
- Optional grenade throwing gesture: move your left (or right in left handed mode) hand to your chest and then make a throwing move in the viewing direction. The original gesture still works too.
2022/02/28
An updated installer for the latest Cyberpunk hotfix is now available. Note that the mod itself hasn’t been changed, the installer just includes a new version of the Cyber Engine Tweaks modding framework. Hence you will see a ‘version newer than expected’ warning. The mod works fine despite this warning.
2022/02/19
Version alpha6a is now available. This update adds compatibility with today’s Cyberpunk hotfix update. No other changes.
2022/02/17
Version alpha 6 is now available. This update adds compatibility with Cyberpunk 2077 1.5 and contains various smaller (mostly gesture related) fixes and improvements.
2022/02/12
Version alpha 5 is now available. This is a major update that mainly adds a brand new feature: several common game actions can now be triggered with natural motion controller gestures, adding a whole new level of gameplay. Try it!
Full Changelog:
- Motion controller gestures added.
- Launch environment with help/tutorial screens added.
- Various fixes and improvements.
2022/01/10
Version alpha 4 is now available with the following changes:
- Improved melee/blocking handling.
- Glitches in regard to using cameras while hacking fixed.
- Glitches during scanner vision fixed.
- Aiming down sights tweaks.
- Confusing notification after Z3D/G3D switch fixed.
2022/01/08
Version alpha 3 is now available with the following changes:
- Pitch (look up/down) auto-leveling added. If you prefer to play with unlocked pitch, you can disable this on the DirectVR page of the ingame menu.
- Keyboard shortcut for switching between G3D and Z3D (ALT+K).
2022/01/02
Version alpha 2 is now available with the following changes:
- Aiming down sights reworked. You can now aim with your head while aiming down sights. Controller aiming is still possible too.
- Incompatibility warning for older game versions
- Various smaller fixes and improvements
2021/12/25
The first update is now available, addressing the following issues:
- WMR headsets did not work with OpenXR. Your Reverb G2’s are now back where they belong: at the top.
- The scope wasn’t centered in view while aiming down sights for some pistols and similar weapons, making it difficult to aim while aiming down sights.
- Uninstalling the VR mod could cause the game fail to launch if certain mods were present before installing the VR mod.
Please uninstall any prior version before installing this update. Otherwise you might still experience the uninstall issue mentioned above later.
In reply to: Almost Ten Years Ago…
Hope to have time to give the G3D a test soon!
Out of curiosity, I see some references to older game versions possibly being an issue? I’ve rolled back to 1.23 and stayed there because the visual degradation in 1.3whatever were just awful. Even after they fixed the ‘water isn’t wet’ bug, it still just looked awful compared to 1.23. That’s been a consistent issue with Cyberpunk, each ‘upgrade’ brings worse graphics and in many cases doesn’t even improve performance (on anything other than the consoles I guess).
I hope this will work with v1.23, or if the entire thing won’t, I hope at least the G3D portion will.
In reply to: Almost Ten Years Ago…
Just tried it. The 3D looks amazing as expected, but performancewise, it’s currently unplayable for me.
The fps counter shows a locked 60 fps most of the time but moving and looking around is really jarring, as if there’s screen tearing goin on or something.
I’ve tried to set everything to low and playing around with Vsync and fps options but none of those helped. Turning off geometric 3D is an improvement but still leaves the game somewhat stuttery.
Specs: 3060 Ti, i7 4790k, 16GB ram. Rift CV1Another issue I noticed; there is no pitch/horizon-lock. Moving the right thumbstick up/down causes the camera to go up/down as well so it never aligns with my real looking direction. I know that some games with direct VR fix this and I thought it would be the same here.
In reply to: Almost Ten Years Ago…
Thank you Ralf for this mod, your hardwork and talent in this area of gaming is much appreciated!
A couple of observations which may help others related to OPEN XR. Setting the mod up with OPEN XR caused a game crash. Switching the mod set up to SteamVR worked fine. This lead me to what I have done in the past with other game mods favoring OpenXR. With a little trouble shooting I found out that changing the SteamVR Settings as follows, I was then able to set the VorpX VR mod to OpenXR.
STEAMVR -> SETTINGS -> DEVELOPER -> “Current OpenXR Runtime” to “SteamVR”
I do have the HP G2 and I do get best perfomance using OpenXR. Perhaps this is placebo for me because using SteamVR also in setup worked ok. Perhaps Ralf has some better technical insight into this.
I’ve setup the mod using Immersive Screen along with a 2560×1440 and turned off a few graphic settings and things look and perform quite well. I’ve increased the FOV to max within the mod and the G3D strength is not bad, gives a good sense of depth. I recogonize that 3D strength preference is subjective for each individual, but is there any way to make this a tad stronger. Ralf, I know you’ve heard this a million times, but I sincerely think that some further G3D settings would be a terrific option for adjusting to ones subjective preference. In any case, not a complaint but a suggestion. Honestly, terrific job on the G3D implementation for this game.
The last thing, perhaps Ralf you can make a suggestion on where to look on this last minor issue. I am using a Mouse/Keyboard setup and everything is buttery smooth with the exception of turning left or right with the mouse. There is very subtle shutter and I mean very slight which fortunately does not ruin the experience. Is there anything you can suggest for what settings to look at, lead the horse to water so to speak. There seems to be a correlation with the mousing sensitivity. When I adjusted and lowered x and y sensitivity to 3 in the game options menu, this mitigated the problem quite significantly. It is only very slight now.
That is all the feedback I have for now and once again, thanks for this Xmas gift. Wish everyone all a happy holidays!
So it gives you an error when you set it to OpenXR right? I did the same as you did, set the setup to SteamVR and then set SteamVR runtime to OpenXR. I’m wondering if the game is actually running on OpenXR though.
In reply to: Almost Ten Years Ago…
Thank you Ralf for this mod, your hardwork and talent in this area of gaming is much appreciated!
A couple of observations which may help others related to OPEN XR. Setting the mod up with OPEN XR caused a game crash. Switching the mod set up to SteamVR worked fine. This lead me to what I have done in the past with other game mods favoring OpenXR. With a little trouble shooting I found out that changing the SteamVR Settings as follows, I was then able to set the VorpX VR mod to OpenXR.
STEAMVR -> SETTINGS -> DEVELOPER -> “Current OpenXR Runtime” to “SteamVR”
I do have the HP G2 and I do get best perfomance using OpenXR. Perhaps this is placebo for me because using SteamVR also in setup worked ok. Perhaps Ralf has some better technical insight into this.
I’ve setup the mod using Immersive Screen along with a 2560×1440 and turned off a few graphic settings and things look and perform quite well. I’ve increased the FOV to max within the mod and the G3D strength is not bad, gives a good sense of depth. I recogonize that 3D strength preference is subjective for each individual, but is there any way to make this a tad stronger. Ralf, I know you’ve heard this a million times, but I sincerely think that some further G3D settings would be a terrific option for adjusting to ones subjective preference. In any case, not a complaint but a suggestion. Honestly, terrific job on the G3D implementation for this game.
The last thing, perhaps Ralf you can make a suggestion on where to look on this last minor issue. I am using a Mouse/Keyboard setup and everything is buttery smooth with the exception of turning left or right with the mouse. There is very subtle shutter and I mean very slight which fortunately does not ruin the experience. Is there anything you can suggest for what settings to look at, lead the horse to water so to speak. There seems to be a correlation with the mousing sensitivity. When I adjusted and lowered x and y sensitivity to 3 in the game options menu, this mitigated the problem quite significantly. It is only very slight now.
That is all the feedback I have for now and once again, thanks for this Xmas gift. Wish everyone all a happy holidays!
In reply to: FF7 Remake out 16 Dec, any expectations ?
Well, i tried but sorry guys… I can’t do better than this…
For the moment, you can try my profile.
Not terrible but not perfect i think.
Have to play a real game session to see if the issues are too much bothering or not.The Z3D will be totally fine i think if you use a mod to disable the dynamic resolution.
G3D is up to you…These are just temporary profile, because i’m sure Ralf will be able to release a perfect one.
Profile used for the G3D is “Star Wars : Jedi Fallen Order”
In reply to: FF7 Remake out 16 Dec, any expectations ?
great find! will try to get a g3d profile up and uploaded over xmas break.. appreciate you all and esp ralpf.. I believe the Z3d works and my eyes or brain is just incapable of perceiving it because the game “world” seems deeper than the edges of the playing field, my brain just can’t do it. Thanks all and merry xmas.. we’ll work together and find what we can find… god bless ralf and all of our VorpX family who continue the work!
